JohnX
Sarge
- Location
- Williams AZ
I am most likely headed to Boise in July?
SoCal Karma Thread
- Thread starter Carol.92124
- Start date
- Location
- In a strange land
Parts train?
And I get to see a friend I haven't seen in almost 2 years?
That would certainly work for me.
And I get to see a friend I haven't seen in almost 2 years?
That would certainly work for me.
- Location
- REDLANDS, CA. (SoCal)
Calico bracket patterns claimed.
paulhead
I overtighten $#!t
- Location
- where compton meets the water
Whenever my ex wife wants to get rid of something that works she dumps it in my house. Keurig coffee machine.
- Location
- Encinitas, Ca
Break, break...CB radio and firestik antenna for the taking, over and out good buddy!
Skwerly
NAXJA Forum User
- Location
- Ash Fork, AZ (Freedom)
oooOOOOooo, are you ever up in the IE?
- Location
- Encinitas, Ca
I'll be passing through on the 15 toward the end of next month, mostly likely May 26th.
Skwerly
NAXJA Forum User
- Location
- Ash Fork, AZ (Freedom)
Oh oh, very good! Marked on the calendar. If you find someone before then it's fine. But if not, I'll meet ya!
- Location
- Encinitas, Ca
Coilover shocks, Radflo 2.0x10 emulsion. Shocks were JUST REBUILT and one of them blew out the bottom cap/bearing after one trail run. I'm thinking the internal snap ring holding the cap on wasn't properly seated. One good one left if anyone can use it.
Drum shoes for Chrysler 8.25 brand new. And hardware kit.
35x12.5x17 Mtr/ kevlar. About 15% tread left. Good for spare.
Used Dana 30 unit bearing. Good enough for a spare.
4- 6.5" pioneer speakers worked fine. No tears or rips in speaker. Upgraded speakers in jeep.
Dana 30 ball joints. New, couple of lowers and 1 upper. Mix of AutoZone and Spicer. No need for them.
Lmk otherwise stuff is going in trash. Thanks.
35x12.5x17 Mtr/ kevlar. About 15% tread left. Good for spare.
Used Dana 30 unit bearing. Good enough for a spare.
4- 6.5" pioneer speakers worked fine. No tears or rips in speaker. Upgraded speakers in jeep.
Dana 30 ball joints. New, couple of lowers and 1 upper. Mix of AutoZone and Spicer. No need for them.
Lmk otherwise stuff is going in trash. Thanks.
Last edited:
AL BUNDY
NAXJA Forum User
- Location
- FULLERTON, CA
Sent you a pm
- Location
- REDLANDS, CA. (SoCal)
Air Cleaner Check Valve; NIB
Standard Motor Products P/N: AV7
Bought by mistake, Way too late to return. My 87 RENIX 4.0 does not have one in spite of what Rock Auto said. The Standard site says it fits too. :dunno:
Click link for reference.
ETA: Fits '84 - '86 4 & V6 engines according to J C Whitney.
GONE
Standard Motor Products P/N: AV7
Bought by mistake, Way too late to return. My 87 RENIX 4.0 does not have one in spite of what Rock Auto said. The Standard site says it fits too. :dunno:
Click link for reference.
ETA: Fits '84 - '86 4 & V6 engines according to J C Whitney.
GONE
Last edited:
- Location
- REDLANDS, CA. (SoCal)
CSF three row, brass/copper radiator for
RENIX closed system.
Needs rodded out.
GONE.
RENIX closed system.
Needs rodded out.
GONE.
Last edited:
paulhead
I overtighten $#!t
- Location
- where compton meets the water
Set of 8.8 Explorer shafts
- Location
- REDLANDS, CA. (SoCal)
New, not rebuilt DuraLast (Autozone) master cylinder for Renix era. Will provide info for lifetime warranty.
New transmission mount (offset)
Both from my '87 MJ parts bin.
Pick up in Redlands. Ship on your dime. I can bring them to the SoCal holiday party.
New transmission mount (offset)
Both from my '87 MJ parts bin.
Pick up in Redlands. Ship on your dime. I can bring them to the SoCal holiday party.
Last edited:
AL BUNDY
NAXJA Forum User
- Location
- FULLERTON, CA
I have some renix parts too if wanted. TCU from an 87 and exhaust manifold & downpipe. No cracks.
- Location
- REDLANDS, CA. (SoCal)
OEM transfer case skid plate. Off of '87 MJ W/231. Not sure of interchangeability. Can bring to Holiday party or ship on your dime.
JohnX
Sarge
- Location
- Williams AZ
All of the following available now or coming off the jeep soon.
Front d30 knuckles from 88
Front Brakes from 88...calipers, pads, rotors
Front wheel bearings, used, probably not great
D30 axle set...disco model
Disco actuator, fork, etc.
Stock 88 xj steering
Stock d35 rear, 3.55 I assume?
Stock Front coil springs
Stock rear bumpstops (surprisingly good still)
Stock lower control arms
Front d30 knuckles from 88
Front Brakes from 88...calipers, pads, rotors
Front wheel bearings, used, probably not great
D30 axle set...disco model
Disco actuator, fork, etc.
Stock 88 xj steering
Stock d35 rear, 3.55 I assume?
Stock Front coil springs
Stock rear bumpstops (surprisingly good still)
Stock lower control arms
JohnX
Sarge
- Location
- Williams AZ
Stock trans crossmember
Similar threads
