I have some steering noises, sort of like a pop, sometimes when turning. 1996 XJ, RE 5.5" LA kit, Truxs 33s.
I read the write up on a set of plates that weld onto my ARB bumper brackets and go back to support the steering box, etc. Here's the write up and contact info for the guy who makes the plates: http://home.comcast.net/~xjmatt/steering/steering.htm
I ordered up a set of these, although little on the steep side, $90 shipped.
One of the noises seems to be coming from the steering shaft, so I went ahead and ordered this: http://www.borgeson.com/Merchant2/m...ore_Code=BUOS&Product_Code=893&Category_Code=
A heavy duty steering shaft upgrade made by Borgeson Universal.
What I am still debating is whether or not I should upgrade, replace, or leave alone, the steering box. My Jeep has about 82k miles, so it can't be THAT worn. My steering generally feels tight, but a reputable shop told me that my steering box some play in it, and will probably need to be replaced. The shop I will see some looseness and more play in my steering relatively soon. So I figure while they're in there, they may as well replace the steering box too. Are there any *good* upgrades? What is the best reman?
If I upgrade or replace the steering box, I want to ensure that it will fit my new steering shaft. This is why I'm hesitant to look into the Durango or S10 boxes.
I was also looking into a MORE steering brace. Is it going to make a difference or help me out at all, especially with the above upgrades?
Yes, I have been searching.
I read the write up on a set of plates that weld onto my ARB bumper brackets and go back to support the steering box, etc. Here's the write up and contact info for the guy who makes the plates: http://home.comcast.net/~xjmatt/steering/steering.htm
I ordered up a set of these, although little on the steep side, $90 shipped.
One of the noises seems to be coming from the steering shaft, so I went ahead and ordered this: http://www.borgeson.com/Merchant2/m...ore_Code=BUOS&Product_Code=893&Category_Code=
A heavy duty steering shaft upgrade made by Borgeson Universal.
What I am still debating is whether or not I should upgrade, replace, or leave alone, the steering box. My Jeep has about 82k miles, so it can't be THAT worn. My steering generally feels tight, but a reputable shop told me that my steering box some play in it, and will probably need to be replaced. The shop I will see some looseness and more play in my steering relatively soon. So I figure while they're in there, they may as well replace the steering box too. Are there any *good* upgrades? What is the best reman?
If I upgrade or replace the steering box, I want to ensure that it will fit my new steering shaft. This is why I'm hesitant to look into the Durango or S10 boxes.
I was also looking into a MORE steering brace. Is it going to make a difference or help me out at all, especially with the above upgrades?
Yes, I have been searching.