4xfishfinder
NAXJA Forum User
- Location
- Nor Cal
Uh! You know that you can buy preformed EMT 90's, right? Plastic on a roof rack? Go the Top Hat Rack, 500lb rating, and they hold a boat load of gear. Make sure to seel all the joints.
Show me your Rack!....Roof Rack that is
- Thread starter dick.breakey
- Start date
austinaubinoe
NAXJA Forum User
- Location
- Montgomery County, MD
Yeah I think I might get a top hat. It cost $400, but it looks Bad Ass. Plus it has mounts for lights on the front and back. Its the only one I could fins that actually fills up the whole roof.
fireLt.
NAXJA Forum User
- Location
- Craig Colorado
I have the Top Hat on my 96. It's been on the rig for 6 years and has held up very well. Gutter mounted so you don't have to poke holes in the roof. Light monunt tabs front and rear. The side rails work really nice in the trees, I know they have saved me from body damage. I buit a simple t-bar to mount the tire. I usually have a high lift mounted along the drivers side of the rack.
Arran_xj
NAXJA Forum User
- Location
- Winnipeg, Canada
i have a top hat too, with my high lift and spare tire on top, i have been on the roof and i am 235 lbs, didnt really flex at all. ill upload pictures tomorrow
jpcherokeekid
NAXJA Forum User
- Location
- north
Dude that rack looks sweet on your rig. i will most likely be getting that one for mine. how tall is it from the roof to the top of the rack?
fireLt.
NAXJA Forum User
- Location
- Craig Colorado
Bumper is by TNT Customs and the steering is one ton GM over the knuckle.
About 7-8'' depending on where you measure with the curve of the roof.
MG2000XJ
NAXJA Forum User
- Location
- Salt Lake City, UT
Let's say you guys want to throw something like a surfboard/snowboard/anything that needs crossbars, what do you do? Thats about the only reason I do not have/will not buy a rack.
jpcherokeekid
NAXJA Forum User
- Location
- north
Sweet thanks. do you notice much wind noise with it?
grandrunner
NAXJA Forum User
- Location
- La Quinta, SoCal
this rack was on a cherokee when i bought it. now its here on my grand.
korn9613
NAXJA Forum User
- Location
- deer park, wa
i made mine out of 3/4 box tube, thin wall, and some expanded. i carry a 33", my stainless on board air tank and compressor and lights, train horn, and its got plenty of room for the other stuff i still need, lift, shovel, blaa blaa. i tried the gutter mount idea, didnt work for me, first big bump and they pop off, especially with weight. my jeep came with those bicycle carrier type clamps, so i made a big bracket, that thos clamps would clamp to, and welded those brackets to some 1/8 plate and then straight to the roof of my jeep.holds up awesome. i can get you some pics up close if you are still interested. i wont waste my time if you already have something figured out. let me know mane!!!!!!!!!
dick.breakey
NAXJA Forum User
- Location
- Bellevue/Seattle
to those who asked about if i chose a rack yet. no. i just sold the xj yesterday. im moving home(Texas from Pittsburgh where im at now) and then ill buy another one(rust free!!!) and restart my build there.
98XJLongBuild
NAXJA Forum User
- Location
- San Jose, CA.
Here's my '93 with a Yakima Megawarrior rack mounted to the stock rails. The main function was to create space inside the Jeep when going camping so it wasn't so cramped with the fiance and our dog in the back. Works great for that purpose and I just load all the lightweight stuff on the rack - like sleeping bags, pillows, blankets, luggage bags, etc. This keeps things from being too top heavy. I like the versatility of the rack since I can easily add mounts for a shovel, hi-lift, spare tire, snowboards, bikes, etc. It's a nice rack and I'll probably get it setup with some gutter mounts and crossbars for strength.
Looks like on I-50 almost at South Lake Tahoe. I've always wanted to hike up to see the water fall that is back there.
DanMan2k06
NAXJA Forum User
- Location
- Damascus, MD
Anyone know what rack this is? Say's 'rock' or something on the front and sides. I asked in another thread but haven't gotten a response yet.
Voteban
NAXJA Forum User
- Location
- Lehi, Utah
Does anybody have a Con Ferr with 4 lights on the front? I just got a sick deal on one that I need to re-finish (surface rust) and I'm going to weld in some light tabs for some of my Christmas presents - 4 Hella 500FFs :]
It'd be cool to get an idea of what it'll look like when I'm done.
It'd be cool to get an idea of what it'll look like when I'm done.
Last edited:
Carmando
NAXJA Forum User
- Location
- Cave Junction, or
I just installed this Rage basket from DiscountRacks.com item RB-50202L. Wasn't happy with most of the other baskets out there for the price. Only $130 plus shipping. Like the size of it 62.5" x 45". Don't like the mounting hardware that came with it but that will be changed out soon. Doesn't look very sturdy in the pictures but it really is. Plan on putting up some lights soon too. Installed a Hanson Rear Bumper with Tire carrier tonight (got it off e-bay). Need to finish it in the morning and get some pictures.
Front view
Side View:
Rack Rear View:
Cheers!
Mike
Front view
Side View:
Rack Rear View:
Cheers!
Mike
dick.breakey
NAXJA Forum User
- Location
- Bellevue/Seattle
not a bad deal for 130. ill probably do that next time. throw in some jcr gutter mounts and i think it would be even more sturdy
katuah
NAXJA Forum User
- Location
- NotTheMountains :-( ,NC
When I go to discountracks.com I get a "domain up for sale." Was that the actual website? If so, looks like you got it just in time.
I'd like to know about that rack in Dan2k06's pic, too. Googling "jeep rock rack roof" .... well, let's just say there's a lot of stuff that isn't it.
MG2000XJ
NAXJA Forum User
- Location
- Salt Lake City, UT
The guy with the unknown roof rack has a build up somewhere, maybe JF. I tried searching for it for a while but I couldnt find it. I think he had a bunch of pictures done for Quadratec if Im not mistaken.
Edit: You can call me the magic man,
here is his build if anyone's interested,
http://www.jeepforum.com/forum/f11/black-99-build-stevieboy-822227/
Edit: You can call me the magic man,
I ordered this rack from Trocko. A friend turned me on to them. They are new to the U.S. market. I was able to get a promotional deal on the rack. Very satisfied with the quality and design. This is their small rack, 40x51, and weighs 36lbs.. It mounts to the cross members of my factory rack. It's working fine, a little creaking now and then. I'm going to have JRC fab a cross bar and use there rain gutter mounts, as I want it strong enough to be used as a photo platform.
Here's a look:
here is his build if anyone's interested,
http://www.jeepforum.com/forum/f11/black-99-build-stevieboy-822227/
Last edited:
xj5280
NAXJA Forum User
- Location
- Denver Colorado
I really liked the price, but your right the hardware blew... I welded some of the parts together along with using their bolts, welded more of the basket to the frame, and welded tabs for the straps. Found some THULE gutter mount bars on CL for $20 and bought some new u-bolts from home depot. Has survived alot of camping gear on it and is fairly light unloaded.
