desertrandy
NAXJA Forum User
- Location
- Simi Valley, Ca
I decided to fix the crack on my window washer bottle on my 92 Cherokee and when I pulled it out I discovered two pumps on it. I followed one line to the front windshield and the other hose snaked all the way back to the rear hatch on the passenger side roof. A little further investigation revealed all the wiring in place to install a switch and rear wiper motor. I have decided to go ahead and install some junk yard parts and have a working rear wiper.
My question for all of you who have this factory set-up is where does the hose exit the body. There is a block off plate at the roof line opposite the drivers side that has a wiring bundle in it. Does the hose just run thru the gromet on this block off plate or is there some kind of fitting where the hose from inside plugs in and another hose outside plugs in and runs through the rear hatch. Thanks.
My question for all of you who have this factory set-up is where does the hose exit the body. There is a block off plate at the roof line opposite the drivers side that has a wiring bundle in it. Does the hose just run thru the gromet on this block off plate or is there some kind of fitting where the hose from inside plugs in and another hose outside plugs in and runs through the rear hatch. Thanks.