dhodgee
NAXJA Forum User
- Location
- South Hutchinson, Ks
I bought new Fox shocks. Everything I read about the factory bar pin left me wondering why people don't just cut through the floor and doing something about it... AND that's what I did! :idea:
I picked up this spring mount from TSC for $12.
![](/proxy.php?image=http%3A%2F%2Fimg215.imageshack.us%2Fimg215%2F8859%2Fdsc02167v.jpg&hash=9c72859dc1f7330d452d3c6ef2ee5f9d)
Uploaded with ImageShack.us
Then Removed the factory barpin once and for all. I drilled a hole up through my floor to find the mounting location from the top. Then I measured about 3" around the hole in the top and started grinding...
![](/proxy.php?image=http%3A%2F%2Fimg267.imageshack.us%2Fimg267%2F7379%2Fdsc02170r.jpg&hash=86c04086cb269df24042bca2d6945230)
Uploaded with ImageShack.us
Here's what the mounting looked like before I welded it in...
![](/proxy.php?image=http%3A%2F%2Fimg62.imageshack.us%2Fimg62%2F7364%2Fdsc02173k.jpg&hash=a713c6e24ac2358b288eed9cd13fb0da)
Uploaded with ImageShack.us
Not to shabby. A lot of good surface for a good bead.
I picked up this spring mount from TSC for $12.
![](/proxy.php?image=http%3A%2F%2Fimg215.imageshack.us%2Fimg215%2F8859%2Fdsc02167v.jpg&hash=9c72859dc1f7330d452d3c6ef2ee5f9d)
Uploaded with ImageShack.us
Then Removed the factory barpin once and for all. I drilled a hole up through my floor to find the mounting location from the top. Then I measured about 3" around the hole in the top and started grinding...
![](/proxy.php?image=http%3A%2F%2Fimg267.imageshack.us%2Fimg267%2F7379%2Fdsc02170r.jpg&hash=86c04086cb269df24042bca2d6945230)
Uploaded with ImageShack.us
Here's what the mounting looked like before I welded it in...
![](/proxy.php?image=http%3A%2F%2Fimg62.imageshack.us%2Fimg62%2F7364%2Fdsc02173k.jpg&hash=a713c6e24ac2358b288eed9cd13fb0da)
Uploaded with ImageShack.us
Not to shabby. A lot of good surface for a good bead.