ponyracer1
NAXJA Forum User
- Location
- Crestview, Fl
Started out as RE 5.5 short arm kit currently long arm radius 3 link front with 2" .250 wall DOM, and 6 jonny joints. RE front springs, with custom trackbar. Also includes custom 1/2 plate Xmember with built in skidplates for Xfer. Rear is RE leaf springs, 4.5 I think?
Front end is custom, no warranty!! With that said, It's been on the road for 5K miles, up to 90mph, zero probs. No steering stab/swaybar needed. Jonny joints should prob be rebuilt. Will flex to 1098 on a 30 degree ramp with 37's, 32.5" vertical lift to the inner bottom of the tire before a rear tire lifts.
No shocks, swaybar or brake lines included
Also have doors, glass, interior parts. I'm keeping Dshafts, engine/tranny/xfer, fuel, cooling system, electrics and anything to make truck run.
Will take $550 for all suspension, possible trade for 5X4.5 wheels (beadlocked) and 36" or so muds. Also looking for 16" rubi wheels.
Buyer to collect due to weight, located at 32539
Here's some pics to prove what I said above, and what this frontend can take with no probs!!
Front end is custom, no warranty!! With that said, It's been on the road for 5K miles, up to 90mph, zero probs. No steering stab/swaybar needed. Jonny joints should prob be rebuilt. Will flex to 1098 on a 30 degree ramp with 37's, 32.5" vertical lift to the inner bottom of the tire before a rear tire lifts.
No shocks, swaybar or brake lines included
Also have doors, glass, interior parts. I'm keeping Dshafts, engine/tranny/xfer, fuel, cooling system, electrics and anything to make truck run.
Will take $550 for all suspension, possible trade for 5X4.5 wheels (beadlocked) and 36" or so muds. Also looking for 16" rubi wheels.
Buyer to collect due to weight, located at 32539
Here's some pics to prove what I said above, and what this frontend can take with no probs!!
