Quick test fit pics of my new 33's

[krelja]

So I just threw some 33's on. I wanted to do 35's but I like the skinny pedal and I need more axle to run them so I settled. Here are some pics from the local spot to set some new bumpstops and check out the new currie steering and whatnot. One question I have is I'm trimmed to the pinchwelds in the rear and there is no way to stuff 35's so how are people doing it? I got some more pics if you want to see themClick to make the pics bigger

 

[Lowrange2]

With more bump stops.

Oh look! You get to change two numbers in your sig!

 

[krelja]

so basically I won't be able to tuck 35's up that high? The 33's are exactly as wide as the widest part of my wheelwells. I'm not afraid to trim more but I'm to the pinch seam

 

[Lowrange2]

You could cut the notches in the pinch seam and fold it up...

 

[krelja]

I do have it trimmed and folded all the way up to the pinch seam that's whay I'm confused. I see people stuffing 35's and now I'm scratching my head

 

[xtimmax]

I do have it trimmed and folded all the way up to the pinch seam that's whay I'm confused. I see people stuffing 35's and now I'm scratching my head

My guess is lots of bump stopping..

 

[lancey3]

Have you added additional bumpstops?

EDIT: i'm an idiot. i can see the hockey pucks in the pix. add another!

 

[blackdoutxj]

that looks sick... mind if i ask where did u get that bumper?!

 

[Ramsey]

I do have it trimmed and folded all the way up to the pinch seam that's whay I'm confused. I see people stuffing 35's and now I'm scratching my head

You can "massage" the inner fenders with a BFH and get quite a bit more room, I actually lost a little leg room, but its hardly noticeable.

 

[krelja]

that looks sick... mind if i ask where did u get that bumper?!

The bumper is a homemade. It's not quite done yet I have to box in the ends and do a couple of other little things. It started out as a piece of 3x5x1/4 angle then add some 3/16 plate and leftover 2x3x3/16 that I had leftover from the tire carrier. Just start messing with metal if you are interested. The only tools it took me to take it was my miller135, a chop saw, 4.5 inch grinder, and some time. I'm saving for a new house so plasmas and all the other goodies will have to wait