97xjowner
NAXJA Forum User
- Location
- New Hampshire
tried searching and couldn't find anwser (maybe didn't look hard enough)
i need to replace rear pinion seal on my 97 XJ.rear axle is a 8.25 29 spline and need to know what size socket is needed to remove pinion nut..
i at first thought i had a D35 so i figured the 1 1/8th socket for the front would work but after dropping the shaft,i found out,nope wrong..
i was told that the D35 has a crush sleeve in it,does the 8.25 have one also ?
BTW-what's the torque #s too.
big Thanks in advance..
i need to replace rear pinion seal on my 97 XJ.rear axle is a 8.25 29 spline and need to know what size socket is needed to remove pinion nut..
i at first thought i had a D35 so i figured the 1 1/8th socket for the front would work but after dropping the shaft,i found out,nope wrong..
i was told that the D35 has a crush sleeve in it,does the 8.25 have one also ?
BTW-what's the torque #s too.
big Thanks in advance..