Project: Hellride. A 1978 J-10

[CTeunuch]

Close ups of Colin's boogers please.

 

[MoparManiac]

I should have taken a picture of his sick chop job.

 

[squashman702]

I was talking about the trees sans leaves, meaning it's winter. I get really bad seasonal depression and the picture made me cryzors. That's robot cry for you IDIOTS out there. Just a bunch of oil pours from my eyes and I make a lot of low beeping sounds for a while. It's pretty sweet.

This may be the funniest thing you've ever posted.

 

[ktm racer 419]

I should have taken a picture of his sick chop job.

youre just jealous you did yours wrong

 

[ktm racer 419]

heres a picture of some levers.

the Shift bank is made from one piece of 1/8" plate, just bent up into shape, for the pivot point, I have a half inch bolt with some half inch spacers from lowes around them, separated by nylon washers. The outer diameter of the half inch sleeves was 5/8" so i bought some 5/8" spacers to mount the levers to. It required a little bit of a round file to get the inside diameter of the 5/8" spacers large enough for smooth operation, but they are nice and tight, with virtually no friction. I will lube them prior to final assembly.

the half inch spacers are tightened down so they cannot pivot, while the 5/8" spacers have the ends ground down so there is a tiny bit of free play between them and the washers.

I'm pretty happy with how it came out. I just wonder If I'm going to like the way I have the levers oriented. (might have wanted the twinstick outputs to be in line with eachother) Maybe I'm just overthinking it.



Made the levers all in line for street driving. Left lever is for the crawl box, middle is for front output, right is for rear output. Just have to get some knobs, then adjust the height of the levers once they are in the truck.

 

[ROBZ95Xj]

i dont see how you and colin do it, i get confused enough at times with 2 levers

 

[ktm racer 419]

i dont see how you and colin do it, i get confused enough at times with 2 levers

neither of us have even used our levers yet.

colin has his 241 shifted by a 9/16" wrench and his 205 is just stuck in low range.

mine are sitting on a bench in my garage.

 

[foxwar71]

Welcome to the triple stick club!!

 

[squashman702]

Welcome to the triple stick club!!

I'm surprised you don't have more sticks to play with.

 

[foxwar71]

I'm surprised you don't have more sticks to play with.

I only have two hands, im already out numbered!!

 

[bert01xj]

I only have two hands, im already out numbered!!

Yes but you have a big mouth.

 

[ktm racer 419]

i got an engine

heres a picture of some levers too because something happened with photobucket a few posts up

 

[rweaver138]

Wicked rad

 

[ktm racer 419]

interior pics from my phone always suck, but outside pics are awesome.

 

[dukie564]

Awesomeness

 

[CTeunuch]

SO GAY. Buy a ****ing front locker first you dumbass.

 

[ktm racer 419]

SO GAY. Buy a ****ing front locker first you dumbass.

go build your own shitty jeep.

front lockers are always the same price and available for purchase anytime.

how many cool engines have you seen local for a cool price that will bolt up to my trans?

EAD

 

[MoparManiac]

It's funny cause pat doesn't have a front locker either.

 

[CTeunuch]

It's funny cause pat doesn't have a front locker either.

SUTTTTTTUUPPPP GRAMPA!!!!!

 

[ktm racer 419]

It's funny cause pat doesn't have a front locker either.