Popped a brake line now brake light wont go out?

[nicpaige]

I blew the brake line going from the prop valve to the rear axle over the weekend. I replaced the line and bled the brakes but the warning light on the dash is still lit. Guesses as to why? Brakes functioning just fine. 2000 XJ non-ABS.

 

[Devilfrog]

The shuttle is still out of place, possibly a small amount of air trapped inside the proportioning valve where the brake light warning switch is located.

Sent from my SGH-I337M using Tapatalk

 

[Digger87xj]

pump the pedal 5 times and press HARD. You should feel it pop a little and the light should go out.

 

[nicpaige]

I will try that asap.

 

[nicpaige]

pump the pedal 5 times and press HARD. You should feel it pop a little and the light should go out.

Wow, thanks so much. That was the easiest fix ever. Big smile on my face when I heard the pop. Great tip.atriot:

 

[Digger87xj]

Cool beans.