LittleAnthony88
NAXJA Forum User
- Location
- New York
A few friends from applehill.com and myself are going to paragon on the 1st saturday in dec so i'd like to see if anyone else from the board is interested in going??
Paragon Run Dec 3rd
- Thread starter LittleAnthony88
- Start date
ProjectXJAppleHill
NAXJA Forum User
- Location
- Mill Hall, PA
We are really looking forward to the trip to Paragon on the 3rd of Dec. If anyone would like information about going, please feel free to contact us at applehill4x4.com
Mark
Mark
LittleAnthony88
NAXJA Forum User
- Location
- New York
ProjectXJAppleHill said:
Sure you are Mark! Are ya taking that nice teal ford escort on the black trails????? (He Hee!)
ProjectXJAppleHill
NAXJA Forum User
- Location
- Mill Hall, PA
yeah, the escort is an just another rock to crawl on! ha ha
LittleAnthony88
NAXJA Forum User
- Location
- New York
Hey Mark, Do ya think if i bring up a bunch of steel, like 2"6"'s 2"X2's" and the flat plate pieces to bolt to the frame (plus weld), run a 60" long piece of 2X6 right up to the pinch welds, add in an "L" bracket to weld or bolt to the pinch welds and then weld in the tie-ins to the frame, do ya think thats doable??
All you guys would have to do is weld em up!
If you think its worth a try so that i have body protection and some piece of mind, then i'll bring the steel and black rustoleum to paint them. You can charge me the labor for welding them up. I already have the design in my head and they'd look similar to these home made rails......
Raw version:
Tied to frame:
Diagram:
Visible bolts to the pinch weld:
Rails on the XJ with still being able to use as a step bar:
????
All you guys would have to do is weld em up!
If you think its worth a try so that i have body protection and some piece of mind, then i'll bring the steel and black rustoleum to paint them. You can charge me the labor for welding them up. I already have the design in my head and they'd look similar to these home made rails......
Raw version:
Tied to frame:
Diagram:
Visible bolts to the pinch weld:
Rails on the XJ with still being able to use as a step bar:
????
Last edited:
brokexj
NAXJA Member #1165
- Location
- TIDEWATER!, VA
Well, the guys from Applehill were there, great bunch of guys, great work. I only saw one other Cherokee there, thougth. Lot of fun, if you can go to Paragon, you should. Thanks again to Applehill for the help on the axle shaft, hope to see you up there again!
ProjectXJAppleHill
NAXJA Forum User
- Location
- Mill Hall, PA
No Problem helping out with the axle shaft. It was alot of fun wheeling with you guys. We hope to meet up again. If you are planning to go to Paragon, drop us an email through our website and maybe we can meet up again. www.applehill4x4.com As usual, if there is anything you need, give us a call or email me and I will make sure you are taken care of. As usual, take care and keep the right side up! Mark at Apple Hill
