98NWCherokee
NAXJA Forum User
- Location
- Portland, OR
I have poured over the various 4wd threads out there as I begin to aquire parts for my 4wd conversion. I have a 98 XJ Limited 2wd with the AW4 and the Chrysler 8.25. I feel pretty confident on the swap but my question is in regards to other items that I should replace while I have the drivetrain apart. So far, my list is:
Rear main seal (one drip a night, but it'll never be easier right?)
Front coil springs (oem and probably sagging)
Front and rear shocks have already been replaced
Obviously bushings and any rubber components in the front end
New shift solenoids in the AW4 with a new filter
New transmission mount
New U-joints in all driveshafts
Any other suggestions while I have it blown apart? Thank you in advance. I'm closing in on a donor 99 AW4/NP231 with linkage and both driveshafts for $500 (80K)
Rear main seal (one drip a night, but it'll never be easier right?)
Front coil springs (oem and probably sagging)
Front and rear shocks have already been replaced
Obviously bushings and any rubber components in the front end
New shift solenoids in the AW4 with a new filter
New transmission mount
New U-joints in all driveshafts
Any other suggestions while I have it blown apart? Thank you in advance. I'm closing in on a donor 99 AW4/NP231 with linkage and both driveshafts for $500 (80K)