Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
Should have pulled a pattern before removing the 4.10's,thats the only way to even come close to re-installing used gears in another housing.What axle are we talking about?Does sound like pinion bearings though!
I just converted it to 4wd but used an np231 from an 89. As a result, the tail cone on the 231 is cable driven so my speedometer isnt working right now.
Should have pulled a pattern before removing the 4.10's,thats the only way to even come close to re-installing used gears in another housing.What axle are we talking about?Does sound like pinion bearings though!
Ya I wanted to do that but unfortunately the gears were already pulled. Whats weird is the pinion seal is leaking also. I got a Master install kit for it. I was there when he installed them, and checked the pattern. It looked good. But I'll check again!
checked my axles book for reference, seems like you have too much backlash.
Best to have your friend re-check it, and have him re-check the torque on all bolts.
checked my axles book for reference, seems like you have too much backlash.
Best to have your friend re-check it, and have him re-check the torque on all bolts.