Misc jeep parts below sac

[88-cherokee]

i have some misc jeep parts from an 88 ckerokee and a 90 cherokee
ill get pictures later

88 full set of doors electric $50 each or $200 for all 4 obo
88 steering colum non tilt i should still have the key to it $25
1990 4.0l motor needs to be cleaned as i rolled my jeep and oil was everywhere ill take $350 obo for it. it had roughly 180,XXX miles i would have to find the gauge cluster to confirm.
Thats the only stuff i can remember right now ill get pics of my stuff and if anyone wants anything in particular just ask i might have it i just need stuff gone so let me know and ill let you know if i have it.
im located about 45 mins south of sac right below elkgrove.

 

[88-cherokee]

the transmission is an ax15 with roughly 180,xxx mils on it im asking $400 obo the trim panel im asking $10

 

[88-cherokee]

2 electric fans $10 each
2 transfer case's 1 from the 88, one from the 90 with a hack and tap sye kit i would like $200 for the one out of the 90 and 150 for the one from the 88

 

[88-cherokee]

this is the motor from the 90
i also have 2 gas tanks with sending units in them $80 each obo , 2 grills and one set of headlight bezels $10 each for the grills and $5 each for the bezels

 

[88-cherokee]

Last picture for now is the doors.

 

[blondejoncherokee]

Is the ax15 external slave style bellhousing?

 

[88-cherokee]

Is the ax15 external slave style bellhousing?

Internal style

 

[blondejoncherokee]

ok thanks anyway. I sold my last 6 auto/manual XJ trannys for under 100$, usually 40$ to members, running shape, but thats only the last 6, before that I did not track them. let me know if you get close to 400$, that would be amazing.

 

[goodwilljeeper]

Kevin Smith is interested in the ax15 behind John, he's on the rubicon right now and can't answer. I can't speak for $$ for him but IK he is interested

 

[88-cherokee]

Kevin Smith is interested in the ax15 behind John, he's on the rubicon right now and can't answer. I can't speak for $$ for him but IK he is interested

Ok ill hold it till i hear from him

 

[88-cherokee]

ok thanks anyway. I sold my last 6 auto/manual XJ trannys for under 100$, usually 40$ to members, running shape, but thats only the last 6, before that I did not track them. let me know if you get close to 400$, that would be amazing.

That's what i have seen them go for used so ill start there its a great transmission never made any noise

 

[blondejoncherokee]

I am not interested. I bet kev wants an external slave version

 

[88-cherokee]

I am not interested. I bet kev wants an external slave version

i know you dont want it and cant you just change the bell housing and put the ext. slave on it ? im unsure if you can or not.

 

[GordoSmasho]

You have to change the front bearing cover that the slave rides on as well. But yes it can be done. I have done it.

 

[Jeep450r]

Thanks for jumping on this for me guys, but I would actually need the external slave cylinder version which I believe is 94+.

 

[88-cherokee]

Thanks for jumping on this for me guys, but I would actually need the external slave cylinder version which I believe is 94+.

Oh ok sounds good sorry it won't work for you