gcurtis
Shirley Temple was a nug.
- Location
- Long since gone.
Anyone have one, besides Currie?
Local source for heims
- Thread starter gcurtis
- Start date
rpraterxj
NAXJA Forum User
- Location
- Lake Forest, CA
gcurtis said:
Hey Grant,
I am not sure if they have them, but try T&J Performance. I know they carry Currie stuff, but they may have a line for heims for you.
gcurtis
Shirley Temple was a nug.
- Location
- Long since gone.
Thanks Robert. I'm trying to avoid the OC Offroad Mafia (T&J's and Currie) because both of their pricing is out of whack on most stuff. Any other ideas?
- Location
- Yucaipa, CA
Kartek Offroad has them, they're in Corona. Or you can order them from McMaster Carr in Sante Fe Springs. All the Offroad shops like Camburg that do the prerunner stuff will have them.
Dan
Dan
Clean Racing
NAXJA Forum User
- Location
- Bellingham, Wa
What about Mckenzies offroad in orange... they are not part of the OC offroad mafia.... orangthorpe and st college if I rememeber right...
jonboy
NAXJA Forum User
- Location
- beside myself
If McKenzies doesn't have em, you might try calling the Baja Shop in Orange
gcurtis
Shirley Temple was a nug.
- Location
- Long since gone.
Thanks, gents!
gcurtis
Shirley Temple was a nug.
- Location
- Long since gone.
McKenzie's had 'em and for cheap. $5 and change per joint.
Needed one more (took their last three) and went to MacFaddenDale. They got me for $13.45 for the same joint.
Thanks again for the help, fellas.
Needed one more (took their last three) and went to MacFaddenDale. They got me for $13.45 for the same joint.
Thanks again for the help, fellas.
- Location
- So.Cal. Low Desert
So what are you working on that would require a "Currie J.Joint" type of spherical rod end to only buy a cheap Heim elsewhere? AND ! if you only needed a cheap rod end why go to Currie? A quality Heim would be an Aurora or QA-1 rod end as to the encapsulated stuff I'm not impressed with the J.Joint or many of the other encapsulated rod ends.....maybe R.E. cause they have the ability to tighten up the slop with the side "cap" .....
Actually it's none of my business I was just curious.
Curt
Oh..very slight chance of rain on Fri., but Sat. looks clear for Truckhaven...... so far.
Sincerely....
The Mayor...
Actually it's none of my business I was just curious.
Curt
Oh..very slight chance of rain on Fri., but Sat. looks clear for Truckhaven...... so far.
Sincerely....
The Mayor...
gcurtis
Shirley Temple was a nug.
- Location
- Long since gone.
Xtreme XJ said:
Nothing that would require anything. All custom fab but since Currie is spitting distance from my house with a good tail wind AND T&J's is about the same, they are the easiest to source parts from, but I avoid them at all costs because they do cost.
As for the heims, not spherical joints, they are for an inboard of the spring quick disconnnect for the sway bar at an angle that the JKS ones I have may not be able to work on (won't know until it is welded up tomorrow). Okay, enough blabbing, I've got a wrench to turn and projects to button up. You'll have to see it on Saturday and the rest (except one or two) will have to wait until the next meet and greet.
Looking forward to this weekend! Looks like we are checking into the rooms before we hook up with you, so we may air down and disconnect up by the radio tower off of S22 (the overlook into Truckhaven). Do you know where that is?
- Location
- So.Cal. Low Desert
gcurtis said:
I thought I hollered back a few hours ago but I guess it didn't take....
10-4 on the Tower up at the County Line.... Let me know if its up there and the time....
See Ya !
Curt
gcurtis
Shirley Temple was a nug.
- Location
- Long since gone.
Done. 
Can someone get ahold of Josh and let him know to check here? Since my Yahoo mess and Socalxj being down, I've not been able to log in or send in a new emal addy...
Thanks!
Can someone get ahold of Josh and let him know to check here? Since my Yahoo mess and Socalxj being down, I've not been able to log in or send in a new emal addy...
Thanks!
