etaniyani
NAXJA Forum User
- Location
- Santa Monica
Hey everyone, I actually just finished building a new drag link to match up with a tie rod i had on for couple months. The tie rod is good, but I dont like the drag link design, and there is too much play in the system. So i'm going to make a new tie rod knuckle to knuckle and a drag link. The tie rod will be on the bottom of the knuckle and the drag link ontop. My question is, besides the sway bar link brackets and the trackbar bolt, does the tie rod interfere with anything else? Such as the diff cover? thanks for the input. I'll probably but using 1 1/4" tubing, either 1/4" or 5/16" DOM tubing.