KC daylighter help

[G.P_XJ]

So i picked up 2 KC daylighter 6" lights (100w) and im trying to wire them right now with the wiring kit provided, but it says i need to connect a wire to either my 56B (low beam for fog) of my 56A (High beam for driving).

The only problem is i have no idea where to find either of these wires.

has anyone wired there's up and can tell me where to find them?

thanks
Garrett

 

[xcm]

both of those wires go to your headlight sockets, if you mean which one of the three, use this pic http://jeep-xj.info/_derived/HowtoHeadlightLoom.htm_txt_Loom 02.gif

find them, and splice into it... but personally, i'd run it straight to hot, so you allways have power there, then use the switched ground to turn em on/off. these are so they ONLY come on with your hi-beams for driving, or low-beams for fog, this is a DOT thing... i trust myself to run them only durring appropriate times, and choose not to use their babysitter wiring.

 

[tbburg]

You can also wire them into a double throw switch(a switch that has 2 "on" positions and a center "off" position) with one side wired into you high/low beam as desired for automatic operation, and the other position wired on with ignition, which gives full manual control.