JUST FOR BANDIT

Re: The "JUST FOR BANDIT" thread

MXBoy11 said:
Oooo that would be AWESOME. I am gunna do the 2" stuff BB and cody's tires, then when I have money for control arms, tires, and all the other stuff, I will pout the rest on :viking:
Click to expand...

yeah do you run a new tb and lca's/uca's as well js customs? and 5" whichs is where ty will be at with his oe bumper you are gonna need something
 
Re: The "JUST FOR BANDIT" thread

Quote:
Originally Posted by WrEkLEsSXJ
yea see so you gotta go on saturday call in sick haha
tom

My jeep NEEDS to get bigger

how am I gonna do that with out money?

they only have me in two days a week which is crazy since I worked 45-50hour weeks the last two summers to purchase the vehicle that fuels this horrible addiction

btw if gordons is hiring I have an exceleent knowledge in sporting goods as well as skateboards


^^^don't know if you saw this yet tom
 
Re: The "JUST FOR BANDIT" thread

bandit455 said:
yeah do you run a new tb and lca's/uca's as well js customs? and 5" whichs is where ty will be at with his oe bumper you are gonna need something
Click to expand...

Yeah, I have the HD RE track bar and bracket. I started out running drop brackets and stock control arms, just replaced them with aftermarket ones last week since the bushings in the stockers were pretty much non existent.
 
Re: The "JUST FOR BANDIT" thread

MXBoy11 said:
Haha yeah to be honest, I am so new to this whole sport, I really do not know what it will take when I get that much lift. I dont want to post and just ask, cause I am gunna get flamed to hell haha. My friend can make me brake lines i am pretty sure.
Click to expand...

For front bumpstops you can use hockey pucks, If you look in the center of the spring perch ther eis a small indent there. If you drill that out and use a self tapper (or a bolt and nut) you can drill holes in the hockey pucks and bolt them in.


For front brake lines if your not going bigger than 4" or so, you can CAREFULLY bend the hard line and straighten it out some, then re-bolt the bracket further down.

As for the rear, rubicon express makes a good brakeline extension, its not too pricey
 
Re: The "JUST FOR BANDIT" thread

Backroads said:
For front bumpstops you can use hockey pucks, If you look in the center of the spring perch ther eis a small indent there. If you drill that out and use a self tapper (or a bolt and nut) you can drill holes in the hockey pucks and bolt them in.


For front brake lines if your not going bigger than 4" or so, you can CAREFULLY bend the hard line and straighten it out some, then re-bolt the bracket further down.

As for the rear, rubicon express makes a good brakeline extension, its not too pricey
Click to expand...


I have also seen guys just rtv the pucks to the perch
 
Re: The "JUST FOR BANDIT" thread

bumper is at J&M getting powder coated.. Should be done shortly! ill post pics when i get it back.

and i went to 4 local junkyards with no luck of finding a third brake light... 2 of them said they didnt sell parts. one there was nobody to be found and the last one they didnt have a single cherokee in the lot... small junkyards suck!! haha
 
Re: The "JUST FOR BANDIT" thread

WrEkLEsSXJ said:
bumper is at J&M getting powder coated.. Should be done shortly! ill post pics when i get it back.

and i went to 4 local junkyards with no luck of finding a third brake light... 2 of them said they didnt sell parts. one there was nobody to be found and the last one they didnt have a single cherokee in the lot... small junkyards suck!! haha
Click to expand...

that sucks

are you just gonna suck it up and go out to the ez pull
 
Re: The "JUST FOR BANDIT" thread

Hammered said:
i'd bet that doesnt last too long


I'm looking at ordering a foot of 3inch UHMW round. I can chop that up and put it on the lathe for rounding the edges and putting a center hole.
Click to expand...

hockey pucks are a known solution to bump stops

but the uhmw ones your making will be slick
 
Re: The "JUST FOR BANDIT" thread

bandit455 said:
that sucks

are you just gonna suck it up and go out to the ez pull
Click to expand...

yea i guess ima have to.. either there or harrys in pennsburg. just didnt feel like driving an hour + for a stupid brakelight i shouldnt even need:gonnablow
 
Re: The "JUST FOR BANDIT" thread

but on another note.. bumper is all pretty!

001-1.jpg


looks too new for my hoopty! ahha
 
Re: The "JUST FOR BANDIT" thread

Bumper looks good...I may have to pull it off and have my dad take it to work with him to get it powdercoated too. I half assed spraypainted it and now it's chipping and rusting everywhere
 
Re: The "JUST FOR BANDIT" thread

definately would.. are you gonna have to grind all the paint off or do they just burn it off or something?
 
Re: The "JUST FOR BANDIT" thread

I think they sandblast stuff... I pull grimy, nasty looking parts out of the junkyards and give them to my dad and they always come back nice and shiny :D
 
You must log in or register to reply here.

Similar threads

R
Congratulations to our new Leadership!
Replies
2
Views
160
STROKER
STROKER
old_man
Looking for fuel injector rail for Renix era 4.0L
Replies
2
Views
329
Marcass
Marcass
PopLockLSwap
WJ swap with OTK steering
Replies
7
Views
429
75SV1
7
J
For Sale my 2001 Jeep Cherokee Limited
Replies
9
Views
770
Anak
Anak
M
Exhaust Manifold for 1996 jeep xj
Replies
3
Views
129
Ogri
Ogri
Back
Top