Jeepspeed Part Out

[chris_amrein]

Body/cage - $2400
Fiberglass fenders/hood/Autofab hood pins - $300 - hood and pins sold
Stock motor w/ Gibson header - $400
UMP air intake - $300
Currie motor mounts and fabricated frame and motor plates - $250
AX-15 w/ Centerforce clutch - $250 - holding on to this for now
NP231 W/ SYE - $150 - holding on to this for now
Trussed Dana 30/Samurai hybrid front axle w/ 3rd member (not complete) - $250
Trussed Ford 9 inch w/ 35 spline axles - $500
Trussed/gusseted 2wd beam - $400
CV front/rear driveshafts - $50/$100
Fabtech upper/lower links and drop bracket - $200
Fabtech Dirt Logic 2.5 x 10/14 inch travel shocks - $1000
Fabtech Dirt Logic front bumpstops - $200 - sale pending with Karstic
Steel braided brake lines -$50 - sold
Cromoly steering and Track bar - $200
Teraflex passenger high-steer knuckle - $200
22 Gallon fuel cell w/ filler, pump, and braided lines - $250
Crow window nets - $50
Autometer in-dash tach - $50
Race radio and intercom - $800
Misc lights, bumpers, hardware, etc. -???

 

[FatCity Ryan]

I need a hood if you would split it from the fenders.

 

[chris_amrein]

I need a hood if you would split it from the fenders.

Sorry man, I sold the hood this weekend.

 

[CaliXJ]

yr and miles on the motor? Any issues?

 

[camojeep88]

Dana 30 front? Pics and specs?

 

[chris_amrein]

Motor was out of a 91 or 92. I bought the car complete and drove it home. It had good compression and power and about 200k miles on it.

Now for the not-so-good, full disclosure part:

I had Kamran (???) and his friend go thru it and put new gaskets in it and mount the header on it. After all the sh!t came out about what a con artist he was I figured I'd still run it because my personal experience with him and his friend was ok. His friend that did all the work and really seemed to know what he was talking about and they provided reciepts for all the parts purchased.

Take it for what it's worth...

 

[chris_amrein]

Dana 30 front? Pics and specs?

Front axle is a Suzuki Samurai center section with Dana 30 outers. It has a square tube truss across the front and bottom. I never got around to making link brackets for it but what's been done is really bitchen and strong. I've got a ton of time into building it. I built it so I could run 5.38 gears and it is stock width. I have 2 stock 3rd members to go with it but no axles.

 

[Goatman]

Can't see the pics.

I'm interested in the front fenders, what type and how much?

 

[Icemans]

I'll get specs on it tonight. Can't remember details off the top of my head.

Still waiting on specs.

 

[chris_amrein]

Still waiting on specs.

It's a Vertex radio (model 2200-D0-50) and Avcom intercom (AR502).

Both brand new. I made a pretty cool aluminum box that mounts the intercom and radio on the floor between the seats and has the push-to-talk button on it. I will include this with the sale of the radio and intercom.

 

[chris_amrein]

Can't see the pics.

I'm interested in the front fenders, what type and how much?

They are Hanaman fenders and I want $150 for the pair.

 

[chris_amrein]

What are the measurements on the fuel cell?

33.75" wide x 10.25" tall x 18" deep.

 

[Goatman]

They are Hanaman fenders and I want $150 for the pair.

Thanks. Those won't work for me.