Important
- Thread starter bshaw
- Start date
- Location
- NE Indiana
All this too?
mac 'that half of the railing' gyvr
- Location
- Clarkdale, AZ
All this too?
mac 'that half of the railing' gyvr
Those pickets look like there's more than 4" between them, wouldn't meet code anywhere I've built decks. Their reasoning for 4" or less is so kids can't get their head stuck between them.
For the railing, I'd get some plastic sheeting to cover your landscaping, get that rope lighting off, and slop it on with a brush, wipe horizontal surfaces, and others as needed.
- Location
- Warsaw, IN
I think Peyton is trying to tell us she didn't want her picture taken.
RedHeep
NAXJA #1499
- Location
- Landenberg, PA
If anybody is looking for a beach vacation, you can stay at my house.
You just have to help me clean the garage, organize the storage shed, install some outlets, tear down the golf cart and wash and wax a couple cars.
Should only take a week or so.
You just have to help me clean the garage, organize the storage shed, install some outlets, tear down the golf cart and wash and wax a couple cars.
Should only take a week or so.
altrocker1
NAXJA Forum User
- Location
- Iowa
I forgot how much doing fiberglass work sucks. Fixed my duck boat yesterday. The only place I had to work was in the sun and the resin was curing too fast...wound up having to sand part of it and do it over. I wore long sleeves but still had itchy arms and legs...ugh. I can't imagine doing fiberglass body work. Yuck
K5Matt
NAXJA Forum User
- Location
- Bremen, Indiana
Tyvek paint suits ftw. I got the hook up...
altrocker1
NAXJA Forum User
- Location
- Iowa
Really....
Hmm. I will need some to paint the jeep and for other purposes as well. I have trouble finding them for cheap in my siZe
K5Matt
NAXJA Forum User
- Location
- Bremen, Indiana
I have large to 4xl, all with a hood.
- Location
- Sheboygan, WI
Talking to a guy on Craigslist about a clean (less rust then mine) 98 Cherokee with a blown head gasket for $200 He doesn't have a title and wants it parted out or scrapped because it has sentamental value, what the hell? Trying to talk him into getting a title for it... Told him I would pay for whatever the paper was and some for his time.
Sometime I get annoyed with people
Sometime I get annoyed with people
- Location
- Clarkdale, AZ
Went and looked at that WJ just now. Looked real nice, just a little rust on the inside bottom of drivers door, and same door interior panel had been poorly re-covered. Every option available.
But the underside was as rusty as I've ever seen, front axle seal leak, gas tank shield (hope it wasn't supposed to be a skidplate) about ready to rust off, floors looked good though. But what looked like sludge on the oil pan was actually some king of epoxy, maybe JB Weld, so I'm guessing that did rust out. AC not working, he said it makes a weird noise on start up under the passenger dash, I'm guessing blend door.
Too many other issues beside the trans for me to want to deal with. Guy was super nice, didn't try to give me any BS.
http://chicago.craigslist.org/chc/cto/5129807865.html
But the underside was as rusty as I've ever seen, front axle seal leak, gas tank shield (hope it wasn't supposed to be a skidplate) about ready to rust off, floors looked good though. But what looked like sludge on the oil pan was actually some king of epoxy, maybe JB Weld, so I'm guessing that did rust out. AC not working, he said it makes a weird noise on start up under the passenger dash, I'm guessing blend door.
Too many other issues beside the trans for me to want to deal with. Guy was super nice, didn't try to give me any BS.
http://chicago.craigslist.org/chc/cto/5129807865.html
K5Matt
NAXJA Forum User
- Location
- Bremen, Indiana
John, if I were you I'd offer $1000 cash and not much more than that.
I've always wished that LKQ would have a picture of each vehicle in their inventory to at least give you an idea what to expect....my wish has finally been granted.
http://www.lkqpickyourpart.com/locations/LKQ_Pick_Your_Part_-_South_Bend-255/recents/
Now who knows what's left of the vehicle you're looking at, but at least you know where damage, etc is now and can rule out vehicles quick.
Mowed two yards, did a bunch of landscaping, and got the parts jeep ready to pull the rear axle. I am spent.
I've always wished that LKQ would have a picture of each vehicle in their inventory to at least give you an idea what to expect....my wish has finally been granted.
http://www.lkqpickyourpart.com/locations/LKQ_Pick_Your_Part_-_South_Bend-255/recents/
Now who knows what's left of the vehicle you're looking at, but at least you know where damage, etc is now and can rule out vehicles quick.
Mowed two yards, did a bunch of landscaping, and got the parts jeep ready to pull the rear axle. I am spent.
- Location
- Warsaw, IN
Well me and the boy entered into an rc crawling competition yesterday. Was the first one both of us have been in. He came in first and I came in second. Not bad I guess for first time.
- Location
- Michigan
Sweet!
- Location
- Clarkdale, AZ
Even at $1000, I just don't have time to deal with all that.
My local LKQ must be working on the picture thing, right now only 3 vehicles show in their inventory.
