- Location
- Rainy side of Washington
Buy a new fan shroud, part number ch3110104, used ones always break within days for me unless they break while I'm installing them. And it is cheap.
Important
- Thread starter bshaw
- Start date
POLAR_JEEP_04
NAXJA Forum User
- Location
- Ohio
Thanks ken
terrehautian
NAXJA Forum User
- Location
- Terre Haute
Friday through mid Sunday, I won't have internet, cell or tv. This place isn't bad, you want bad, try going on Indiana gun owners trying to read new posts. Usually around 12000 or more new posts per day
poorboy87
NAXJA Forum User
- Location
- Linton Indiana
Most timing chains over 100k have slop in them. Not really excessive but they do strech.
I had heard of the cut the tabs off trick and spin it before and have never heard anything bad from it.
Mine has a lot in it at 275k. I hear it smacking the cover. Occasionally on a cold start on take off it bogs down and then picks up. It also lopes sometime times and hunts for idle.
Im not that worried about it. If Im felling froggy one weekend Ill stab a chain in it.
I had heard of the cut the tabs off trick and spin it before and have never heard anything bad from it.
Mine has a lot in it at 275k. I hear it smacking the cover. Occasionally on a cold start on take off it bogs down and then picks up. It also lopes sometime times and hunts for idle.
Im not that worried about it. If Im felling froggy one weekend Ill stab a chain in it.
- Location
- Columbus, In
- Location
- Bourbonnais IL.
Good morning jeepers!
I hate coming back to work after having a few days off. no one handles my job like i do. just makes my mondays after time off longer.
I hate coming back to work after having a few days off. no one handles my job like i do. just makes my mondays after time off longer.
XJ&CHZ4ME
NAXJA Forum User
- Location
- Unionville, MO
morning Sam!
WB9YZU
NAXJA Forum User
- Location
- Madison, WI
Good Morning Sam!
We'd all like to believe that no one can do our job better than we can :laugh3:
-Ron
- Location
- bourbonnais IL
basically all i look at over there. i tried to get in on the local B/S thread for the NWIN guys but if you are not reading every post you get lost easy.
terrehautian
NAXJA Forum User
- Location
- Terre Haute
I took Friday off, work up to Wednesday. Then I a, off for seven work days. When I take off, it takes three people to do my job because the person who fills in for me is not trained on it and has no drive to be trained on it.
99SJ_Ex
NAXJA Forum User
- Location
- La Crosse, WI
Cleaning Shop today and tomorrow with the classes.
Reviews Wednesday
Finals Thursday and Friday.
99SJ 'We're almost there' Ex
Reviews Wednesday
Finals Thursday and Friday.
99SJ 'We're almost there' Ex
- Location
- Michigan
Went wheeling yesterday, I got sick of asking T if she wanted to drive and stopped the jeep and told her to drive. She had a great time and was still talking about it when we finally went to bed.
She is dead set on me building Flo for her. I may have to set some ground rules beforehand, like she must help with the build, or at least be in the garage to bring me beer and get me wrenches. Lol.
Fore 'looking for used lift parts' Wheeler.
She is dead set on me building Flo for her. I may have to set some ground rules beforehand, like she must help with the build, or at least be in the garage to bring me beer and get me wrenches. Lol.
Fore 'looking for used lift parts' Wheeler.
kmanxj5050
NAXJA Forum User
- Location
- Reed City Michigan
Work until friday then 9 days off. Driving down to Mississippi to sit on a beach without kids for 6 of those days and do ABSOLUTELY NOTHING!!!!
kmanxj5050
NAXJA Forum User
- Location
- Reed City Michigan
Going to buy a new DD?
We are looking into Tahoes/Yukons and will be buying in the spring. But Lex said we ARE NOT selling baby jeep and it is getting a little more lift and agressive tires. :scottm:
- Location
- Lafayette, IN
I started out with rotating the distributor on the Suburban, while watching cam retard with a scan tool. I could correct the ignition timing relative to the crank position, but suspected with how far I had to rotate the dizzy that the chain was stretched and the valve timing was still off. It was still slow and ran like crap. I never would have seriously considered changing a timing chain on anything before, but I'm a believer now, it sounds better and has way more power. Now I'm considering a chain on my ZJ with 298k just to see what happens.
In the process I screwed up my oil pan gasket. I was so pissed off trying to change it this weekend, I was going to track down your number to see if you had any tricks I could use. Ended up dropping the front diff a few inches to get the pan down just a little bit, then I had to fish the gasket down into the pan and under the pickup tube. What a pain.
Yea thankfully things aren't like that around here! :eyes:
Last edited:
RAM-ROD
NAXJA Forum User
- Location
- Libertyville IL
Loved the video.....It's like crack to them.... Tara was DDing our XJ and next thing I knew she had a new JKU......Building Flo will cost you less.....
Ram" This JKU is fricken sweet" Rod.....
BRIANHO13
<- Yum Chocolate
- Location
- Spring, TX
I am working through Thursday then off to Savanah for a week. Return to work 6/16
- Location
- Michigan
Re: Re: Important
We are talking about that. I would need something before anything happens. Also thinking about looking for an already lifted jeep for her.
Less cost is the key. I was very surprised how much she enjoyed driving, which is a problem too.
We are talking about that. I would need something before anything happens. Also thinking about looking for an already lifted jeep for her.
I'm not expecting great results.
Less cost is the key. I was very surprised how much she enjoyed driving, which is a problem too.
- Location
- Michigan
Seen a surgeon today, she's sending me to the spine docs to talk about injections, fusion or nerve burning.
Fore 'no surgery, for now' Wheeler
Fore 'no surgery, for now' Wheeler
