Important

[macgyvr]

i have fingerprint dust all over me...

mac 'it gets everywhere' gyvr

 

[BRIANHO13]

Pretty sure tj is leaving me this weekend

 

[FlexdXJ]

Screw snow! Gonna be 73 and sunny here today, going to the Daytona magic shop(my cousin is a 36 year old kid at heart). Going to a museum tomorrow and medieval times for dinner. I went as a kid, should be just as entertaining as an adult!

Flexd' fetch me my mead wench' XJ

 

[IllianaXJ]

Pretty sure tj is leaving me this weekend

To be replaced with...?

 

[RedHeep]

Just got done moving the shocks on the mounts of the boy's 1:10 stadium trucks they got for christmas. Got a little more compression and rebound by mounting them a little more vertical and raised the ride height a bit. Should be a little less twitchy on the steering and smoother on the bumps.

red 'just like a 1:1 but smaller' heep

 

[FlexdXJ]

Just got done moving the shocks on the mounts of the boy's 1:10 stadium trucks they got for christmas. Got a little more compression and rebound by mounting them a little more vertical and raised the ride height a bit. Should be a little less twitchy on the steering and smoother on the bumps.

red 'just like a 1:1 but smaller' heep

I've got a 1/10th crawler. 1/16th short course truck(brushless trucks are insanely fast) and been thinking of picking up one of the micro rs4 rally cars for some mad gymkhana action in the kitchen.

 

[RedHeep]

I've got a 1/10th crawler. 1/16th short course truck(brushless trucks are insanely fast) and been thinking of picking up one of the micro rs4 rally cars for some mad gymkhana action in the kitchen.

We got them the duratrax 2.4's. Not crazy expensive or the most up to date design, but you can bash them and they stay together. With lipo's they were running hard enough to do standing wheelies across the yard.

 

[BRIANHO13]

To be replaced with...?

An xj to wheel like its my bitch, picking up tons on Tuesday

 

[bwfdrums]

An xj to wheel like its my bitch, picking up tons on Tuesday

Bad ass!

 

[bwfdrums]

Dicking off before I work on the jeep again.

 

[FlexdXJ]

We got them the duratrax 2.4's. Not crazy expensive or the most up to date design, but you can bash them and they stay together. With lipo's they were running hard enough to do standing wheelies across the yard.

I've had a few traxxas trucks and beat the hell out of them. The slash has a tendency to roll multiple times all nascar like. The duratrax trucks are getting much better than when they came out.

 

[poorboy87]

An xj to wheel like its my bitch, picking up tons on Tuesday

Like

 

[BRIANHO13]

Got a guy wanting to trade this for the tj

1971 z28 camaro 500hp sharp car and a mean sound
https://www.youtube.com/watch?v=Mvy0yIeVZBs&feature=youtube_gdata_player

 

[vt98xj]

Got a guy wanting to trade this for the tj

1971 z28 camaro 500hp sharp car and a mean sound
https://www.youtube.com/watch?v=Mvy0yIeVZBs&feature=youtube_gdata_player

Do it! My friend had a 70 Camaro with 450ish 383 stroker that was a blast then he rebuilt it into a 383TT that was 1100ish drove it for a year and parted it out.

if it is a true Z28 then it is worth more then a TJ (depending on what you have done to it)

 

[IllianaXJ]

Hope nobody was planning on going to Redbird on New Years, it will be the only state property closed on NYD. Cancelled a lot of plans already, IFWDA always has a huge club run on NYD every year.

 

[macgyvr]

Hope nobody was planning on going to Redbird on New Years, it will be the only state property closed on NYD. Cancelled a lot of plans already, IFWDA always has a huge club run on NYD every year.

whats up with that?

mac 'holiday?' gyvr

 

[OutkastBoss]

Love me some R/c's I have a pair of 1:6 scale Crawlers locked and geared so low they barely move .
I would like to do a Scale XJ with interior/undercarriage and the works I even saw a warn 8274 winch like I have and a similar bumper.

I also have a Duratrax nitro evader truggy with every Aluminum part available, upgraded nitro motor, hardened gears, titanium thrust bearings and a custom cut aluminum spur gear, at about 1.5 Lbs and 1.5 Hp it is a beast.
It has seen many fast rollover/cartwheels and after replacing pretty much everything with aluminum only the plastic rims break now.
I found a company that cuts aluminum wheels I want for it .

I used to have a few mini heli's but they are easy to crash and built planes with my brother but he crashed them before I got a turn.
I think If I ever get another aircraft it will be a quad rotor.

 

[FlexdXJ]

whats up with that?

mac 'holiday?' gyvr

Because it falls on a day the park isn't regularly open.

Flexd' boss lady must have plans' XJ

 

[macgyvr]

I have a TRAXXAS T-maxx 2.5 chassis with a 3.3 motor...well on the 3rd motor. It needs broke in...

Have a ton of parts and crap for it, either need to start using it or sell it.

mac 'RPM arms' gyvr

 

[*89Laredo*]

We need more entertaining posts...
89"drunk"Laredo