Important

That's awesome that their is a song for that.

we should prolly get off the topic of habenero cheddar hootuses, before somebody gets burned. ;)
 
Each and every year I get sick around the end of October, beginning of November, usually lasting a week to 3 months. I'm allergic to dust, pollen, mold, etc; it all accumulates into a WMD on my sinuses... This years bout started around 7:30 last night with the typical symptoms and severity. While I normally was able to spend a couple days out of action to fight it and, in most cases, get over it. This year theres a new variable... I am a teacher, and I refuse to take time off for this. So the game has started, the first pieces have moved. It's going to be interesting to see what happens next...
 
drug home a 69 Chevy long bed as a parts donor truck, the seller said "errr, I dun some werk to it a few years back, but I recokn scrap price is all it is worth"....So I gave him $150 and drug it home. It has a 98% rust free cab, power steering, power brakes, lots of usable non-rusted sheetmetal, new fuel tank, good tailgate...list goes on and on...

Goldie lives on, I used her old Ramsey winch on the trailer to drag that flat tired SOB up on it, still a good winch!

Cheese "ugly seafoam colored LWB" Man
 
drug home a 69 Chevy long bed as a parts donor truck, the seller said "errr, I dun some werk to it a few years back, but I recokn scrap price is all it is worth"....So I gave him $150 and drug it home. It has a 98% rust free cab, power steering, power brakes, lots of usable non-rusted sheetmetal, new fuel tank, good tailgate...list goes on and on...

Goldie lives on, I used her old Ramsey winch on the trailer to drag that flat tired SOB up on it, still a good winch!

Cheese "ugly seafoam colored LWB" Man

I have always wanted to slam a mid 80s longbed, we had an 87 worktruck called Sanford (from Sanford and son) when i was a kid ...when my parents split and my dad liquidated the business he sold it for 600 bucks after I begged to buy it from him and he wouldn't sell to me

Short"ratrod"xjdoug
 
Looking through a pile of parts, I found a 231C out of a Blazer... With the stroker build and bigger tires, and my Tcase leaking out of every seal (I believe bad output bearings) what can I do with this thing? I've read about pulling the internals and putting them into the J housings, or can I just swap my SYE over onto this one and call it good?
 
No I think i have common scene and the ability to figure out problems and come to a logical solution, I do not see why other people can not see the obvious things that I see.
 
Andrew Luck and the Colts: 5-3 and Luck with 2,404 passing yards.
Peyton Manning and the Broncos: 5-3 and Manning with 2,404 passing yards.
 
No I think i have common scene and the ability to figure out problems and come to a logical solution, I do not see why other people can not see the obvious things that I see.

That does not make you an asshole.

How you handle pointing out what is obvious to you either makes you an asshole; or not as the case may be in the eyes of the receiver.

I've never found you to be an a-hole, just very blunt :D
 
Looking through a pile of parts, I found a 231C out of a Blazer... With the stroker build and bigger tires, and my Tcase leaking out of every seal (I believe bad output bearings) what can I do with this thing? I've read about pulling the internals and putting them into the J housings, or can I just swap my SYE over onto this one and call it good?
I don't think the C case will bolt up to the AW4, you can probably split it, stick the guts and the rear half of the case on the J case fronthalf. It works with grand cherokee 242's in a campground anyway.

Am I really an Asshole?

yes.
 
When I redid the popcan motor years ago I just used a rebuild kit from napa...

mac 'it was already 30 over' gyvr
 
Anybody that's rebuilt a 4.0, Wered you purchase your rebuild kit from?
I dunno, but make sure you get the copper high-temp plastigauge from NAPA for doing the muffler bearings. You want 30 gauge, if NAPA doesn't have it radio shack has rolls for cheap.
 
When I redid the popcan motor years ago I just used a rebuild kit from napa...

mac 'it was already 30 over' gyvr

Was gonna call them. Found a few online. Not sure which I want.

K "get what ya pay for" mam

I dunno, but make sure you get the copper high-temp plastigauge from NAPA for doing the muffler bearings. You want 30 gauge, if NAPA doesn't have it radio shack has rolls for cheap.

:flipoff2:

I may not know where to get a caneuter valve but I have used plastigauge.
 
Back
Top