wingnutooa
NAXJA Forum User
- Location
- Nashville TN
you must have done the same thing i did with my door hinges. lift off like the wranglers do.
easy cheesy lemon squeezy.
you need to find a thousandths drill bit to shave out the hole a little to get the roll pin to enter and exit easier but not so much that its sloppy. i would also take some emery to your roll pins if they are rusty. and some greeez.
and if you get really ambitious cut about 3/4 of an inch off of the top or bottom so you dont have to line them both up at the same time. i've been planning on doing this for about 3 or 4 years now and one of these days i'll get around to it.
easy cheesy lemon squeezy.
you need to find a thousandths drill bit to shave out the hole a little to get the roll pin to enter and exit easier but not so much that its sloppy. i would also take some emery to your roll pins if they are rusty. and some greeez.
and if you get really ambitious cut about 3/4 of an inch off of the top or bottom so you dont have to line them both up at the same time. i've been planning on doing this for about 3 or 4 years now and one of these days i'll get around to it.