kerndogg
NAXJA Forum User
- Location
- Pueblo, CO
I just added a ram to my steering. stock box tapped and stock pump. I took it for a quick test drive without the ram and eveything worked like normal. Then i added a 1.75 bore psc ram to it and lost all power steering. I pulled the fitting out of the pump and the check valve was stuck down. I got it to pop lose and i tried my best to flush the system with clean fluid. Now it works intermittently, i have to really crank the wheel and it will more with power and then it sticks and you really have to crank on it again. Got any suggestions? I am trying to get it ready for claytom this weekend and i am running out of time. BTW i also unhooked the ram from the steering so it is just cycling without a load on it. It seems to work fine on jackstands but them struggles when it sits on the ground. I don't know what is the culprit, pump, gear or ram. Thanks for your help.