FSJ project part out

Hippie Metal

NAXJA Forum User
Location
Brookfield, CT
Ok ladies and gentlemen. The time has come to part out my beloved crawl rig. My life has taken a turn and I need to roll with it. I shall return to the FSJ world, but unfortunately that time is not now.
Anyway...onto the good stuff.

1984 GW
Drivetrain:
Mild built 360
4bbl intake/carb (Edelbrock)
Comp Cams 260re set
3 angle valve job
Edelbrock Shorty headers
New Y-pipe
3'' Magnaflow exhaust from BJsoffroad

T-18(drives fine, needs seals)/Twin stick 205

Suspension:

Alcan leafs out back
Deavers up front
Bilstein 5150s on all four corners. 2 are 10'' 2 are 12'' Both sets haven't been run for more than 25 miles

Knick Knacks:
Roof rack
Gladiator Nose
29 Aux tank from Aerotanks (Brand new, has only had 4 gallons of gas in it)
Body is good
Frame is good

I aslo have spare AMC20 shafts. 2.72 gears for D44/AMC20
A set of 3.73 gears for front D44.
As well as a spare NP205.

Please PM me with serious offers on parts, I'm a fair person with pricing but am not going to be steamrolled, so please don't waste my time. Can provide pics of what is needed. Thanks.
 
Yup. I do remember, maybe had I kept them and tossed them in I'd be a little more against this decision, but its needs to much to keep streetable, I don't have a truck and trailer, and I don't have a lot of free time anymore. I'll be back to the wheeling world soon enough.
 
500 for motor no headers (less if you don't want alt(powermasters 140amp 1 wire alt))
600 for tank
500 for full exhaust
300 for all 5150s
Still have doors and glass. Power everything
Roof Rack 300. (Will post a picture when on an actual computer.
All of this stuff was purchased brand new. I'm pretty much giving this stuff away at this point.
 
Well somebody PMd me with the subject title "part out" but for some reason when I went to open it it disappeared from my inbox. Also, I can't see anything in my sent messages.....sooooo...whoever sent that last PM please send it again...or post up here and I'll PM you
 
Back
Top