FS: Daystar Transmission Mount

[Mike L]

1 x KJ01010bk : Transmission Mount (98-01) - $40

This part is brand new and is available for pickup between 92808 and 90220 along the 91 freeway. Shipping is available for additional cost. Let me know if you have any questions. Thank you for looking.

 

[saki669]

I could give ya $40 for this shipped to Pomona. PM if interested.

 

[Mike L]

PM sent.

 

[2stix]

quadratec shows that mount to fit 84 - 01. but yours says 98 -01. do you happen to know the differance? i need one for an 89.

 

[Mike L]

quadratec shows that mount to fit 84 - 01. but yours says 98 -01. do you happen to know the differance? i need one for an 89.

The description for the part I have is incorrect on Quadratec. It is correct for the other Daystar mount. Take a look here:

KJ01007BK - For 84-97 Jeep® Cherokee XJ
http://www.quadratec.com/products/76058_841.htm

KJ01010BK - (Should say) For 98-01 Jeep® Cherokee XJ
http://www.quadratec.com/products/76058_831.htm

I have the bottom one for sale. My 98 used the top one. Hope this helps.

 

[2stix]

cool thanks for clearing that up. looks like i too need the top one.

 

[99xjache]

I sure could use this. will it fit in a flat rate bag or box?

 

[Mike L]

I sure could use this. will it fit in a flat rate bag or box?

PM sent.

 

[Mike L]

SPF

 

[WebDog]

That is a great mount, I got one on my 90!

 

[Mike L]

SOLD

 

[Davo98XJ]

Hey there, just replaced my automatic trans mount in my 98 XJ. Was the one in the bottom picture he had shown, if you look at the old one it is offset as the new one is not so I had to do a bit of fabricating on the crossmember the bolt holes slide through. Just a heads up:gonnablow

 

[Mike L]

Hey there, just replaced my automatic trans mount in my 98 XJ. Was the one in the bottom picture he had shown, if you look at the old one it is offset as the new one is not so I had to do a bit of fabricating on the crossmember the bolt holes slide through. Just a heads up:gonnablow

Sounds like your Cherokee would have used the top one. My 98 used the top one as well. Good luck.

 

[Davo98XJ]

Ya I noticed that the old one was offset in the mount and ended up just drillin new holes. Even 4 wheel parts can screw up getting you the wrong stuff. Thx for the help. know anyone that has that mount, I looked on quadratec and looks as if they do not sell it anymore.

 

[Mike L]

I think Daystar discontinued it.