Missiletech
NAXJA Forum User
- Location
- Bremerton, Wa
I swapped out my highly broken older Turdy for a newer not broken one finally and I used the UCA/LCA measurements from the multiple resources via search but when I raised the axle without springs the bumpstop almost completely misses the spring cup on the front side.
I've got a 6" lift with the RE Drop Brackets which should be UCA of 15.5" and LCA of 16". Is it normal to have this akward path from sitting to bumpstop contact?
I've got a 6" lift with the RE Drop Brackets which should be UCA of 15.5" and LCA of 16". Is it normal to have this akward path from sitting to bumpstop contact?