• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Free stuff

blondejoncherokee

NAXJA Member
NAXJA Member
Location
sacramento
Free stuff:

Got 3 radiators, i think all closed, the newer 3 core one had a hole drilled through it . all free- must take all 3. one could be open?

1" lift blocks, set of 2" lift blocks, aluminum, all off part out rigs- i never ran them.

i think i might have a set of stock coil isolators for an extra 5/8" lift up front

steering sector shaft (goes from column to box)

AX15 with cracked bell housing, from a 92Xj

1 set of rear leaf spring plates (perfect for LCA skids)

stock LCAs

some 18.5" lower control arms, extended rough country arms, some of the bushings are brand new.

tons of stock U bolts

stock front bumper

stock 8.8 cover

stock 30 cover

maybe a renix coolant bottle

open system overflow bottle



Ill post more stuff tonight . i don't want to meet up or ship, if you want the free stuff you need to show up at my place and grab it.
 
Potential dibs on the RC LCAs. Gotta run out and check the lengths.
 
they are 18.5" long. they are sleeved and pretty beefy.
 
so they were shorter, and you cut them, lengthened them, and sleeved them?
 
Rob lengthened them yes. they are 18.5" fixed LCAS, reduce the angles and get longer lowers, you'll need roughly 17.5" long uppers, thats what i ran with 5.5" lift, pushes front end forward a bit.
 
Dang, nevermind. Way too long for me. Mine are closer to 16". Ill wait to push my front end forward till I 3 link it . Thanks though
 
if you really want, you can do exactly what he did, and size them to your benefit.
 
yah this was just off the top of my head the other day of some of the stuff just lying right in walkways. gets annoying when you don't need it, super cool and awesome when you do need it.


on top of that stuff,
(not getting rid of this stuff, this is spares, but it gives you an idea of how much crap i have:)
i have a pile brake rotors
Aw4
hp30
tons of shafts(ds and axle)
alternators, starters, a/c pumps, fan clutch, sector shafts, boosters, masters, t case parts,
spring plates, hoses, u bolts, 3 exhaust setups,
cross members,
lowers, uppers, shocks, lots of shocks,
a 9000lb winch,
5.5" leaves
tons of XJ specific bolts and nuts
windows, a set of doors for half doors,
whole front clip
head lights
tai lights
stock isolators
interior parts
throttle bodies
air boxes
unit bearings
bushings , oil filters, tons of sensors,
steering boxes,
pitman arms
tie rods and drag link
air compressor(ARB for on board air)
service manauls
tons of XJ stuff... more than this I'm sure

a 59 jeep willys and all its spare parts too....

too much stuff for so little garage space
 
Last edited:
it shifted OK. It had the usual stick in first gear here and there cuz someone ran GL5 and the synchros are a little worn. still got me to work and back every day. it wouldn't be a bad idea to change the gear oil and swap in some royal purple or just rebuild it, or just screw all that and swap it in . first person to grab it gets it i guess. someone please get it, i am running out of room.
 
140K on it.
 
i could use a right tail light assembly & center grill section for my '92 if you have any & can bring to sf this weekend.
 
ax15 is gone, 18" lowers are gone

the other list of stuff wasnt being given away, it was just listing a ton of crap i need to make room for.

i dont have a grill knucklehead to giveaway, but i do have a tail light. i need to know if passenger or driver side, right changes if you look from the front or the back of the vehicle.

connor i dont have any spare pitman arms to give away, the one spare i had, im throwing into my heep as a trail spare,
 
cool, as long as i don't space out and forget it should be in my jeep. see ya on SR saturday
 
Back
Top