HttpWayne
NAXJA Forum User
- Location
- Auburndale, FL
These fuel injectors are NOT a swap-n-pop replacement. I'm sure they can be ran with modifications made, but don't try to use them. The idle bounces from 750 to 1000, and on acceleration the engines vibrates horribly and misses/stumbles.
I used these fuel injectors just after we broke the cam in on my 4.6 stroker; and I believe that this is ultimately what caused the cam to get wiped out which took some of the valve lifters with it.. resulting in purchasing and installing a new cam and lifters after decontaminating the engine. Basically had to rebuild the stroker in the end.
I ran the actual 24 pound injectors that were pulled from a Ford Mustang Cobra, AND the summit racing 24lb'ers brand new. Neither worked.
I then found this interesting article after the ASE certified mechanic assisting me told me he found out from someone else that he works with that there are "high frequency and low frequency" fuel injectors.
Here's the link to what I found out. After also searching on summit I found out that the Ford Mustang's injectors, leading me to believe that Jeep uses Peak and Hold style injectors.
http://hondaswap.com/general-tech-articles/peak-hold-vs-saturated-injectors-30347/
I used these fuel injectors just after we broke the cam in on my 4.6 stroker; and I believe that this is ultimately what caused the cam to get wiped out which took some of the valve lifters with it.. resulting in purchasing and installing a new cam and lifters after decontaminating the engine. Basically had to rebuild the stroker in the end.
I ran the actual 24 pound injectors that were pulled from a Ford Mustang Cobra, AND the summit racing 24lb'ers brand new. Neither worked.
I then found this interesting article after the ASE certified mechanic assisting me told me he found out from someone else that he works with that there are "high frequency and low frequency" fuel injectors.
Here's the link to what I found out. After also searching on summit I found out that the Ford Mustang's injectors, leading me to believe that Jeep uses Peak and Hold style injectors.
http://hondaswap.com/general-tech-articles/peak-hold-vs-saturated-injectors-30347/