Feeler-XJ 11" lift D44/9" whole or parts

[Colorado Red]

First of all...Sorry this is just a feeler to start. If I get enough interest I'll unload the Jeep or parts. Also....COLORADO only, I will not ship, sorry.

I've run out of parking space, as well as time for the Jeep. Let me know if you're interested in the whole thing or parts...I'm trying to decide to sell it outright or get rid of the big lift parts and drop it down before selling it. E-mail me for a few pics.

1989 XJ Limited, 120k miles, 242 t-case with SYE & Woody's shaft, Supernerfs, Prerunner with lights, Bushwackers, roof rack, very nice high end stereo with mids, tweets, subs, cd and amp, Viper alarm and remote start...leather in nice shape, except crack in driver's seat, still shiny paint (red), overall in great shape! Very limited off road use, and only on the trail twice since current lift/tires/axles. Approx. 11" lift with parts below and ACOS and shackle...its pretty darn big...not something you want to drive every day, but you could. Gets tons of looks!

Now the good stuff...and I'll consider parting this...
Full width HP D44 setup for XJ, custom steering, detroit, Warn hubs,
all rebuilt recently, 5.13 gears
Full width 9" with XJ mounts, detroit, 5.13s, nodular housing
8" Big Offroad leafs
8" Skyjacker coils
(5) Nearly new 37" MTRs on 15x10 5on5.5" Mickey Classic 2's
Probably more...just trying to get an idea if anyone wants this
stuff.
Make me some REASONABLE offers on parts or the whole thing and I'll
see if its worth my while to start the process. If you don't know
how much to offer I can give you a breakdown of what I have into the
axles.

Thanks.
-Mike
[email protected]

 

[93Jeepin]

 

[jetranger_2000]

Yesyesyesyesyesyes


Pm Sent

 

[mission-inc]

If you were to part it, how much would you want for the springs and coils? I might be interested in your shocks, but i need to know what kind they are.

Thanks.
:farmer:

 

[xjrugger]

pics?

 

[Colorado Red]

Mission-inc....I'm getting a decent amount of feedback for the Jeep to be sold as it is. I'll let you know if all those loose interest. It would just be easier for me to let it go as is.

xjrugger...pics of what? I'll be taking pics of the Jeep as soon as I get my camera back...by this weekend. If you want to see something specific, let me know.
Here's a front and rear pic, but they didn't turn out very well, and its at a slightly smaller lift.
http://www.msnusers.com/qqc5vke27f8pogqgre0c6ec457/Documents/Pictures/P2280074.JPG
http://www.msnusers.com/qqc5vke27f8pogqgre0c6ec457/Documents/Pictures/P2280075.JPG

Thanks for all the interest!
-Mike

 

[hjeepxj]

How "setup" for an XJ is the front end? Does it have a bracket kit on it? Is it narrowed?

Im interested...

 

[Colorado Red]

hjeepxj-
Its actually full width. If you want to use UCAs, you'll need to install the mounts for those. Mine is setup with a Beefed up RockKrawler tri-link front suspension. Otherwise the LCA mounts and trackbar mount are Rubicon's weld on mounts.
I'll post pics of the actual axles when I get my pics up.
-Mike

 

[Roxtar]

Mission-inc....I'm getting a decent amount of feedback for the Jeep to be sold as it is. I'll let you know if all those loose interest. It would just be easier for me to let it go as is.

xjrugger...pics of what? I'll be taking pics of the Jeep as soon as I get my camera back...by this weekend. If you want to see something specific, let me know.
Here's a front and rear pic, but they didn't turn out very well, and its at a slightly smaller lift.
http://www.msnusers.com/qqc5vke27f8pogqgre0c6ec457/Documents/Pictures/P2280074.JPG
http://www.msnusers.com/qqc5vke27f8pogqgre0c6ec457/Documents/Pictures/P2280075.JPG

Thanks for all the interest!
-Mike

WTF is this $hit!
I click on your fawkin link and get stuck in some frigging endless loop of crap to sign up for. Had to ctrl/alt/del to get out.

 

[hjeepxj]

hjeepxj-
Its actually full width. If you want to use UCAs, you'll need to install the mounts for those. Mine is setup with a Beefed up RockKrawler tri-link front suspension. Otherwise the LCA mounts and trackbar mount are Rubicon's weld on mounts.
I'll post pics of the actual axles when I get my pics up.
-Mike

Allrighty, and how much $?