Feeler : Built 98 XJ for sale in NC

BennettXJ

NAXJA Forum User
Location
Raleigh, NC
I really dont want to have to do this, but i just can't afford the jeep anymore. my loss is your gain. heres the specs:
1998 XJ limited, flame red w/ grey leather.
4.0/aw4/242 - 81k miles
all options (overhead console, power drivers seat, power everything...its a limited)
all fluids and service done. I am second owner, first owner had all services accounted for, i can get records from the shop i used to work at.
now for the good stuff:
suspension:
5.5" RE ZJ coils, tera spacer for 7.5" front.
Rustys UCAs, Tera LCAs, RE 1660 T bar and bracket.
JKS QD2s, CarolinaRockShop HD tierod
DT3000 shocks with JKS converters/BPEs
6" custom rear springs (from 2 RE 4.5" packs) and shackle for 8" of lift
DT3000 shocks with JKS BPEs

wheels/tires:
5 TJ canyons with spidertrax spacers on all corners
new 33x12.50 Bridgestone Dueler MTs (#2 on tirerack.com), spare is ~40% left

drivetrain:
HP30 w/ 4.88s and lockrite, drilled rotors
ford 8.8 w/ 4.88s and lockrite and discs
Tom Woods DS, RE SYE

Armor:
pre96 ARB bullbar, Warn XD9000 (hella 550 driving lights)
c4x4 rockers
factory skids (gas, tcase, front included)
c4x4 corner gaurds and rear bumper/tire carrier
-hilift mount, aux backup lights mounted on there

Engine:
Borla catback
Borla Header
Rustys AirTube
Poweraid TB spacer
MSD 8.5mm wires and bosch plugs
IAT mod, elec fan swap, 2core rad, upgraded modine trans cooler

Other:
Hella H4 conversion w/ IPF Magic-Js
Whiteface gauges + trans temp gauge (not hooked up)
Custom OBA setup in rear with flushed in storage compartment
Surco bigass rack with hella 500s and 1000s mounted
custom switch panel on center console
pioneer 3 way speakers in all locations
30th anniv chrome grille
drawtite class 3 hitch with warn shackles front and rear


Interior is flawless, all windows/doors/switches work. no tears or wear in leather. fenders are cut cleanly with flares mustached front and rear. no body damage or scratches. all fluids changed last month, oil changed regularly with synth. gears set up professionally, as well as all welding and fab by CarolinaRockShop. only thing it needs is an E-Brake cable for the 8.8 I hate to see it go, but it will make someone VERY happy, this is an awesome jeep. I'll post pics as soon as i get some recent ones taken.

Open for offers now, asking $16500 OBO

Thanks,
-Ben
 
not parting it out...at least not yet. its going as a whole or not at all
here are some semi-recent pics
since then, all the stickers are off, the front got the ZJ coils and rear got 1.5 more inches of lift and rear fender chop to match the fronts

pics

This was my DD and trail rig and it turns heads everywhere. clean enough to be a show truck but built to tackle tellico. someone needs it

-Ben
 
Back
Top