cherokee4.0
NAXJA Forum User
- Location
- California
First off, yes, I read MANY postings after doing a search and I still don't get it.
I'm thinking about getting this 2000 cfm electric fan to replace my metal fan BLADE only: http://cgi.ebay.com/ebaymotors/14-INCH-12-VOLT-ELECTRIC-RADIATOR-COOLING-FAN-PROCOMP_W0QQcmdZViewItemQQcategoryZ46096QQihZ017QQitemZ270048796004QQrdZ1QQsspagenameZWDVW
However, I don't know what other parts I need or how to hook them up. I'm reading about "switches" and "relays" but ???
I have ONE wire that goes from a brass "something" screwed into the therm housing to an after-market temp gauge in my dash. Can I use this for an elec fan actuator?
I want the fan to come on at 195 and off at 190.
So what else do I need and where can I by what else I need.
Thanks!
I'm thinking about getting this 2000 cfm electric fan to replace my metal fan BLADE only: http://cgi.ebay.com/ebaymotors/14-INCH-12-VOLT-ELECTRIC-RADIATOR-COOLING-FAN-PROCOMP_W0QQcmdZViewItemQQcategoryZ46096QQihZ017QQitemZ270048796004QQrdZ1QQsspagenameZWDVW
However, I don't know what other parts I need or how to hook them up. I'm reading about "switches" and "relays" but ???
I have ONE wire that goes from a brass "something" screwed into the therm housing to an after-market temp gauge in my dash. Can I use this for an elec fan actuator?
I want the fan to come on at 195 and off at 190.
So what else do I need and where can I by what else I need.
Thanks!