Driveshafts, trans, tcase, Instrument cluster, wheels,

[JohnX]

First up, driveshafts. Both from a 87 with 4.0, auto, 242. Both are in very good runnable condition. $50 front $10 rear.

Next...the above mentioned AW4 and 242 All sensor and wiring intact. Drove home 40 miles with no issues after purchasing it, then removed from XJ. $200 for both.

Set of five of these wheels...one pefect, the rest are just average for their age. $60 for the set of 5. $20 if you only want the good one.
Worst one....

Best one...

I have only three of these, but maybe someone needs one for a matching spare? $10 each.

Set of four WJ wheels. 16 inch. Tires are spoken for already and will be dismounted soon. Pretty much in excellent shape. $100 for four.

Instrument cluster from an 87. High mileage (270k I think), but works good and has full gauges. $25

Electric fan, from same 87...works fine, one small crack in plastic, but i'll repair it before the sale. $25

Clutch fan and shroud, perfect shape. $20

 

[JohnX]

More...
Cruise control unit, works good, what you see is what you get (except my feet, I need those). $10

Stock crossmember. Good condition, very straight, no damage. $20

Instrument cluster bezel. Near perfect condition, not cracked, broken, or missing holes. $20

Front clear turn signal housings. $15 for both.

Rear tail light housings, bulbs, wiring, all intact. Good shape, lenses are bright and not broken. $40 for both.

Misc. trim and marker light lenses... Free with purchase

Flowmaster 40 series 3 inch in/out. I have two...$30 each.

ALL PRICES ARE BEST OFFER AND RED LETTERS GET A BREAK.

 

[-96JeepSpeed-]

Are both of those Flowmasters 3in?

 

[JohnX]

Are both of those Flowmasters 3in?

Yep.

 

[Gerr]

john I can use the drive shafts and a flowie

 

[ZomBrady]

John, I'll take the fan shroud.

Maybe we can work something out for the turbine rims too. Do you have any matching center caps laying around?

 

[AlwardFab]

how many splines on the np 231 and how much $.

 

[JohnX]

John, I'll take the fan shroud.

Maybe we can work something out for the turbine rims too. Do you have any matching center caps laying around?

Sounds good, we can take it out of that bumper. I only have 2 center caps for them

I noticed your shroud was broken all to heck when I worked on it, but forgot I had one laying around :twak:

 

[JohnX]

how many splines on the np 231 and how much $.

Its a 242 and should be 21 spline.

 

[ZomBrady]

Sounds good, we can take it out of that bumper. I only have 2 center caps for them

I noticed your shroud was broken all to heck when I worked on it, but forgot I had one laying around :twak:

No problem.

As for the center caps, are they the 'older' big letter JEEP ones? I don't think it will be very hard to find some at the pick and pull if they are. . . .

 

[Kejtar]

how long is the rear shaft and how long is the front? Dibs on both depending on length

 

[GrimmJeeper]

john I can use the drive shafts and a flowie

how long is the rear shaft and how long is the front? Dibs on both depending on length

too late Remi

 

[Kejtar]

too late Remi

oops.... just shows how much attention I pay to your posts

 

[JohnX]

too late Remi

Yep, done deal.

 

[Ecomike]

If you will ship to 77587, So. Houston, TX, I will take the Tail lights, trim and marker lenses, and front turn signal housings.

Thanks.

What else do you have?

 

[Skwerly]

Would you separate the 242 from the tranny by any chance? Pretty sure I grenaded mine! My tranny is fine though.

 

[JohnX]

Would you separate the 242 from the tranny by any chance? Pretty sure I grenaded mine! My tranny is fine though.

$100 for the 242 by itself??

Let me know, I can bring it to the M&G next Saturday if your going.

 

[JohnX]

oops

 

[RobertF]

John,
I'd like to get the tranny if Skwerly's getting the transfercase.
Will you take $100 for it?

 

[JohnX]

John,
I'd like to get the tranny if Skwerly's getting the transfercase.
Will you take $100 for it?

Yep.