dimond cut headlights?

G.P_XJ

NAXJA Forum User
Location
Centennial, CO
I had some similar to these on an S-10 I owned. The plastic housings faded and I had to start Flitzing them to keep them bright and clear. I'd recommend using some glass housing lenses. If you're on a budget, do like I did and buy the Autopal brand ones from Ebay. The run around $42 shipped.
 
Get some autopals instead.
They'll give you the best bang for the buck... especially with an upgraded harness.

a5ff_1.JPG
 
Last edited:
That second harness is for a 4 lamp vehicle.

The harnesses are not XJ specific; so you can get them from a dozen different places for just about any price between 25 and 150, depending on how it's setup, where it's made, and whose name is on the box.

As for installing them, it's pretty straight forward. Here's one example. A lot of us are running this same harness, and a few that are identical except for the relays. Prices vary between $25 and $80.

http://www.opiebennett.com/tech/headlight/index.htm
 
Get some autopals instead.
They'll give you the best bang for the buck... especially with an upgraded harness.

a5ff_1.JPG

Great price. How do those compare to a Hella housing and light pattern?
 
Those are just blue tinted H4 lamps, all that's doing is turning good light into garbage.
 
Well it's alot better than what the stock ones put out, and good enough for this beater! :D
 
I am running Autopals in mine have both the dimond cut and e code running the ecode now they are glass lens and throw good light the dimond cut dont have a reflector inside covering the blub they are a littlr brighter but not street legal.
 
Back
Top