WB9YZU
NAXJA Forum User
- Location
- Madison, WI
I know one of my issues when installing axle shafts on an XJ was dragging the splines through the tubes.
Seems like no matter how careful I was, the splines would end up on the tube!
Recently, I did an axle shaft replacement on my D30 equipped JKU and found that they used guides to keep the shaft splines from scrapping on the tubes when you put them in. I figure that a D30 shaft on a JKU and a XJ are the same, so here is the MOPAR P/N >> 68004090AA .
www.quadratec.com
Seems like no matter how careful I was, the splines would end up on the tube!
Recently, I did an axle shaft replacement on my D30 equipped JKU and found that they used guides to keep the shaft splines from scrapping on the tubes when you put them in. I figure that a D30 shaft on a JKU and a XJ are the same, so here is the MOPAR P/N >> 68004090AA .
Crown Automotive 68004090AA Front Axle Shaft Guide for 07-18 Jeep Wrangler JK with Dana 30 Front Axle
Fits either driver or passenger side.
