Buncha suspension parts

BigKintheXJ

NAXJA Forum User
Location
Cupertino
Decided I wont be lifting my dd, have a bunch of parts that I've accumulated and now they're for sale.

(4) BFG AT/KO 31x10.5r15 with nice tread life left ~400$

2000 Aw4 120k miles np242, comes with a bunch of sensors ~150$ Transmission slips, but I wont seperate them, no torque converter

97 2wd 213k miles, good condition, replaced the solenoids, and did a filter and flush job on it. missing most of the electrical connections but has the majority of the wiring. Torque converter and some sensors included ~50$

stock xj leaf springs with 3" aal, 150k miles on the springs, 4k on the aal. sagged quite a bit, good for bastard packing though. bushings are old, but they look good. ~50$

(2) sets of 2" coil spacers ~20$ a set

(2) bilstien 5100's for a 4.5" lift, 0 miles on them, minor surface rust ~110$

pair of sway bar disconnects made by Dukie ~80$

pair of RE 3" lift coils, painted black. bought em from 831_xj a while back ~50$

RE adjustable track bar (3"~5" lift im guessing) with a rebuildable JJ at the frame end, axle bushing is in good condition ~100$

RC shackle relocation brackets and longer shackles, 2" lift shackles? ~175$

RC adjustable control arms full set, Johnny joints on lowers at the axle. ~200$

RC Control arm drop brackets- [waiting on replacement UCA mount from RC], brand new hardware kit ~150$

Pics upon request. everything's in decent condition, but they've been outside, covered with a tarp or a cardboard box so some of it has a bit of surface rust.

all prices are negotiable within reason. no trades unless you've got something really shiny/dd worthy
 
4.5 would be too tall for my short wife!
she already has a plastic folding step thing she uses to climb in with then has to pull the step in with a rope. the joys of being 5'-1" tall.
 
They seem quite different in design to the 4.5" coils in my rig, and when I tried swapping them out it sat shorter. Mayhaps 3.5"? As for the leaves, Tim, id be shocked if you measured a full 2" of lift over stock with them. They came from my 89, and I had recently broken them in (after the aal install) with a hefty 400lb load of garden stones.

If 4.5" is to much with the coils, how bout the 2" coil spacers, and I throw in a stock pair of coil isolators?
 
Hey Tim I got some pretty sweet paracord grab handles from a guy on cherokeeforum. They've been mariahs best friend for getting in.

Karl they might be the 3.5 I can't recall I got them of a guy near me with a xj buggy he said 4.5
 
how about $50 for the unknown lift coils & bastard pack leafs.
i can mix & match the leafs with the ones i have now & possibly make them work.
 
Sounds good Tim.

The drop brackets are not yet complete, I bought a part that had been lost when I bought them but its the wrong part. Id rather not ship, but if no one local wants em for a while I might consider it.
 
Back
Top