built D30/8.25combo

[ct67_72]

Time to go. Just tracked down a noise to a couple broken pinion teeth. So I guess its time to upgrade.
Front will have a brand new gear set installed before its sold.

Front 30
Nitro 4.88 gears, new bearings etc.
Aussie locker
New spicer carrier.
New ballistic lower mount on pass side, drivers side is plated but will come with a new ballistic mount.
Mini truss out of 3/16 square tube
WJ knuckles, JKS 1/4 spacers, new style, brand new (300 miles) Akebono dual piston calipers. Brand new rotors drilled for 5 on 4.5
one new spicer u joint. spare shafts. new yoke
very recent spicer ball joints
I think thats it for the front.

Rear 8.25
nitro 4.88 with new bearings
Aussie locker
Stock drums
welded bump plates from axle
yoke drilled for u-bolts.
newer wheel seals

will come with crossover steering to bolt into xj. stock WJ steering was shortened and sleeved with 3/16 DOM.

only pics at the moment. They will be ready to bolt in and run.

$1500

I might seporate but im not sure what I want seporate. I have a lot of money in the front, with the brakes and all

Located in Meriden CT

 

[ct67_72]

I will also take partial trades for a balljoint 60 front, 8 lug wheels 17", 38"+ tires and parts for an axle swap.
I will also take off 300$ If I dont fix the front.

 

[ct67_72]

Im going to part these out. Will sell lockers, gears, housings etc.
WJ setup.
Will trade parts

 

[AmnDay]

I would love to take these off your hands but wont be back in town till the first of the month, if you still have them I will take all fixed or not.

 

[ct67_72]

I would love to take these off your hands but wont be back in town till the first of the month, if you still have them I will take all fixed or not.

I dont mind waiting if you are definitely interested in taking them. I have a ton of interest in parts, but of course it would be much easier to sell complete. If you wanted to paypal me a deposit or something I would hold them for the next 2 weeks.
Just let me know. I really need them gone so I can order the parts I need to put in my other axles, but I dont mine a couple weeks.

 

[ct67_72]

front is being parted. locker and all wj parts will be removed.
I will sell everything that is left (carrier, gears, axles, stock xj knuckles etc.) for 175$
Rear is still complete. Lat shot before I pull locker and gears.
500$ for rear complete.

 

[ct67_72]

Rear locker sold. Buy the whole rear minus locker for 200$
No shock mounts and yoke comes with u bolts instead of straps.

 

[garr]

front is being parted. locker and all wj parts will be removed.
.

Are you selling the WJ parts?

 

[ct67_72]

All sold.

 

[ct67_72]

UPDATE**
Front wj parts, and front locker is sold
Rear locker is sold.
still have 4.10 up front carrier. 35$
front 30 housing with one ballistic mount, plated others, new spicer ball joints, stock knuckles. High pinion, 50$
Rear 8.25, minus locker, I have to find the stock side gears to make complete, but it shouldnt be a problem. 29 spline.
Complete with 4.88's, welded bump plates, good brakes, no shock mounts, rear yoke drilled to take u-bolts instead of straps, will come with recently new u-bolts. $200

 

[Moo Moo Jeep]

Interested in Ch8.25. Do you plan any trips toward NJ or NYC?

 

[ct67_72]

Going to pa in about 2 weeks.

 

[Moo Moo Jeep]

Going to pa in about 2 weeks.

When exactly because I'm going to upstate NY on July 4th and coming back on 7th or 8th.

 

[ct67_72]

I'm going to try on the 7th, but I'm not positive.

 

[Dundy]

Pm Sent for D30 carrier