cardinal
NAXJA Forum User
- Location
- connecticut
selling 2 rc cars
first is a axial ax10 with new ckrc aluminum knuckles and axle c's, set up with full high steer, new aluminum threaded long travel shocks set up 40% droop 60% sprung, aluminum 4 link plates, bent lower links front and rear, custom long upper links, hd axial lockers, proline beadlock wheels, moab tires and custom meamory foams, custom vertical body mounts, novac 55 turn motor and novac rooster esc, hitec 645mg steering servo, traxxas reciever and controller aluminum four link plates, low center of gravity, has won local comps, no torque twist drives up everything, just needs a battery, was running a small 2s lipo. $400
Second is a new revo 3.3 brushless conversion using a 3905 e-maxx tranny, new losi custom 1/8th scale diffs with aluminum cups and cases, aluminum single servo steering with new hitec 7955 titanium gear servo, center cvd's, waterproof reciever box with new 2.4 radio, new mamba monster 2200kv system, new traxxas red rods 7075 aluminum toe links, and tie rods, new extended wheelbase a-arms, aluminum bumpers, aluminum full skids, new body, new aluminum threaded revo platinum shocks, new maximizer 1/2 offset black beadlock wheels with hpi dirtbonz tires. comes with 3s 5400 battery, ready to run this thing moves on 4s+ BULLETPROOF BULLETPROOF BULETPROOF $700
for pictures pm me with e-mail
need cash for my axle build
first is a axial ax10 with new ckrc aluminum knuckles and axle c's, set up with full high steer, new aluminum threaded long travel shocks set up 40% droop 60% sprung, aluminum 4 link plates, bent lower links front and rear, custom long upper links, hd axial lockers, proline beadlock wheels, moab tires and custom meamory foams, custom vertical body mounts, novac 55 turn motor and novac rooster esc, hitec 645mg steering servo, traxxas reciever and controller aluminum four link plates, low center of gravity, has won local comps, no torque twist drives up everything, just needs a battery, was running a small 2s lipo. $400
Second is a new revo 3.3 brushless conversion using a 3905 e-maxx tranny, new losi custom 1/8th scale diffs with aluminum cups and cases, aluminum single servo steering with new hitec 7955 titanium gear servo, center cvd's, waterproof reciever box with new 2.4 radio, new mamba monster 2200kv system, new traxxas red rods 7075 aluminum toe links, and tie rods, new extended wheelbase a-arms, aluminum bumpers, aluminum full skids, new body, new aluminum threaded revo platinum shocks, new maximizer 1/2 offset black beadlock wheels with hpi dirtbonz tires. comes with 3s 5400 battery, ready to run this thing moves on 4s+ BULLETPROOF BULLETPROOF BULETPROOF $700
for pictures pm me with e-mail
need cash for my axle build
Last edited:
