VAhasnoWAVES
NAXJA Forum User
- Location
- Lake City, Mi
currently under my cherokee, ready to pull on any given day.
wanting to move in a different direction and start over. these axles started life as a full width axles and were narrowed down to factory jeep width. will fit other jeeps with minor modification. will fit other vehicles with enough work.
HP44:
- 61" WMS
- 30 spline OX locker w/ shifter cable
- nitro 5.13 gears
- nitro shafts and super joints (TJ rubi inners, chevy outers)
- spare (stock take off) shafts
- chevy knuckles, chevy brakes, ford rotors, 5on5.5 bolt pattern
- warn locking hubs (x3) and solid industries slugs
- parts mike high steer arms and inverted T Steering
- TNT truss. currently set up with custom 3 link
Ford 9"
- 60" WMS
- nitro high nodular third, daytona pinion support, forged yoke
- ruff stuff pinion guard
- nitro 5.13 gears
- 35 spline detroit
- nitro cut to length shafts, 5on5.5
- chevy half ton calipers with dodge rotors
- home brew truss
- currently set up with leafs, bolt in to a cherokeee
asking $4000
for $4500 ill throw in:
- the track bar and frame side bracket
- custom long arm setup and crossmember
- prothane front bump stop setup
if you want the entire suspension setup and hydro assist, we can make a deal. it all works together REALLY well. PM me.
located in saint clair shore, Mi.
can load you up with the cherry picker.
can arrange delivery via trailer too.
wanting to move in a different direction and start over. these axles started life as a full width axles and were narrowed down to factory jeep width. will fit other jeeps with minor modification. will fit other vehicles with enough work.
HP44:
- 61" WMS
- 30 spline OX locker w/ shifter cable
- nitro 5.13 gears
- nitro shafts and super joints (TJ rubi inners, chevy outers)
- spare (stock take off) shafts
- chevy knuckles, chevy brakes, ford rotors, 5on5.5 bolt pattern
- warn locking hubs (x3) and solid industries slugs
- parts mike high steer arms and inverted T Steering
- TNT truss. currently set up with custom 3 link
Ford 9"
- 60" WMS
- nitro high nodular third, daytona pinion support, forged yoke
- ruff stuff pinion guard
- nitro 5.13 gears
- 35 spline detroit
- nitro cut to length shafts, 5on5.5
- chevy half ton calipers with dodge rotors
- home brew truss
- currently set up with leafs, bolt in to a cherokeee
asking $4000
for $4500 ill throw in:
- the track bar and frame side bracket
- custom long arm setup and crossmember
- prothane front bump stop setup
if you want the entire suspension setup and hydro assist, we can make a deal. it all works together REALLY well. PM me.
located in saint clair shore, Mi.
can load you up with the cherry picker.
can arrange delivery via trailer too.
