Bilstein Front Shocks for 2-3" lift

xj_mike

NAXJA Forum User
Location
San Diego, CA
I have a front pair of Bilstein shocks (the yellow model, can't recall the series number) that were freshened up by Bilstein (very good friend is R&D manager there). They have zero miles on them since freshening up. They had shaft wipers installed so no boot is needed.

They will work perfect for a 2" lift or a 3" if using stock arms that will hit the axle mount when drooped. My 3 1/2" lift and JKS arms allowed my axle to droop about an 1" longer then the shocks would. Before I swapped the arms out, these were just about right.

$75 for the pair. Located in San Diego. Can ship if needed but prefer pickup. Shipping additional.

PM me if interested. Thanks. :D
 
Okay, here are some meaurements.

I hook the tape under the lower barpin (bottom of mountung surface) to the shoulder on the shaft the stud mounts lower washer sits on.

The measurements are, extended is 21 3/4", compressed is 13 3/4" for a total of 8" of travel.

How about $60 for the pair, local pick up or can ship with shipping paid by buyer.

Anyone doing a small lift? :D
 
Pardon me for asking, but have we met? I have a good friend at Bilstein and thought we might know someone in common.

Kevin in Escondido

KH
 
Hey Kevin, you smuck... it's Mike, with the white XJ. We went to school together *shaking head*
 
xj_mike said:
Hey Kevin, you smuck... it's Mike, with the white XJ. We went to school together *shaking head*


Now thats funny. I thought it might be you but wasnt sure.

Did you ever straighten out the sway bar pin we bent?

BTW its Mr. Schmuck to you ;)

KH
 
ATMA weapon-XJ57 said:
How Bout 50 And Ill Pick Up?

Sure, what the heck. PM me for address and phone number.
 
Kevin3151 said:
Now thats funny. I thought it might be you but wasnt sure.

Did you ever straighten out the sway bar pin we bent?

BTW its Mr. Schmuck to you ;)

KH

Yep, got home and got it pulled straight. No worries, Mr Schmuck. :-p

L8R
 
Back
Top