ok, so, lets see if ive got this right, i need to jumper the b and c terminals on the neutral safety switch wire thingy's, i need to get a flywheel from an 89 manual...not the one that i have currently which is an 89 auto...i need to get the clutch and brake pedal assy., i need to get the master cylinder that bolts to the firewall, i have to use the t-case that is on the manual trans, not the one from my auto trans, i have to use the driveshaft from the manual trans b/c its a dif length, and of course i need the pilot bearing, pressure plate, and clutch...is that it?? plz somebody correct me if this is wrong or if im missing something! thanks everyone