Anyone in sacramento have 19lbinjectors?

blondejoncherokee

NAXJA Member
Location
sacramento
Last edited:
You old set is probably 24 lb or so. Only the renix had 19. I actually found some stockers just for smog but ill still want some ford 4 hole yellow injectors.
 
Theres a part number on the injector. See what it is, research the flow rate. If they are 19lb ill take em
 
I have these:

P1010203_zps4fa7c53c.jpg


P1010202_zpsaab93770.jpg


#'s on side of injectors 0280155740 and #F6VE-A5A with a ford logo.

If you can use them, take em. Don
 
Ya ill take em don. Thanks. Still need help swapping that 44 front ? Let me know .
 
You sure those 22.5's arent stock?

That should be 22.5 at 43 psi. Your MJ probably runs 31 psi up to 39 psi at WOT.. which brings the rate down.
 
You sure those 22.5's arent stock?

That should be 22.5 at 43 psi. Your MJ probably runs 31 psi up to 39 psi at WOT.. which brings the rate down.

They are not stock for a renix, these are dodge neon injectors. These are good for a 91+ XJ . I threw stock renix injectors on there though. Dons are the usual 19lb. I would be interested to consider throwing these injectors back on and seeing how that affects smog now that it passed.
 
It shouldn't make much difference. The computer can compensate for a slightly larger injector by shortening the cycle, it just can't take a smaller injector and make it stroker huge (it would have to spray non stop).

Renix rigs like to run a little bit rich, anyways.
 
It shouldn't make much difference. The computer can compensate for a slightly larger injector by shortening the cycle, it just can't take a smaller injector and make it stroker huge (it would have to spray non stop).

Renix rigs like to run a little bit rich, anyways.

this is good to know. Ill keep these 22.5lb injectors around then.
 
Back
Top