35'e are on!!!

i know, it is worth it to me to build it with the right components before having the meat slabs bolted to my hubs. i have a jeep worthy of 33" tires but won't have the $ till next summer for the tires, because i spent all my $ building it. so im stuck with 31" super slicks. ahh well. and yea the ride will definately suck until you get some solid control arms in there. ironically the track bar is the only thing i on my front end that IS stock for my 5" lift. i just re-drilled for it so the axle is center. ehh well..
 
Well since I went through all the trouble so make em fit. I will give up my specs.

1996 Sport/120000 miles
3" Procomp Lift(6 years old)
Recently added 2" spacer in front and blocks in rear with sonoma leafs.
Added a new Adj tracbar upfront too.
Chopped fenders in front and rear
Approx 5" of lift maybe 5.5 in the rear.

I gotta break on the tires and got sick of looking at them in the garage. So I put them on as best I could...Yeah, axles are coming, but not until I break the ones under there now. My dough isnt as long as some of the guys on here, so don't be hating.

Here is the link

http://s64.photobucket.com/albums/h195/slaisebam/


I appreciated what everyone has to say, just remember, we all gott alearn somehow, and some may be blessed with more patience..
 
slaisebam30 said:
Well since I went through all the trouble so make em fit. I will give up my specs.

1996 Sport/120000 miles
3" Procomp Lift(6 years old)
Recently added 2" spacer in front and blocks in rear with sonoma leafs.
Added a new Adj tracbar upfront too.
Chopped fenders in front and rear
Approx 5" of lift maybe 5.5 in the rear.

I gotta break on the tires and got sick of looking at them in the garage. So I put them on as best I could...Yeah, axles are coming, but not until I break the ones under there now. My dough isnt as long as some of the guys on here, so don't be hating.

Here is the link

http://s64.photobucket.com/albums/h195/slaisebam/


I appreciated what everyone has to say, just remember, we all gott alearn somehow, and some may be blessed with more patience..
Click to expand...
That actually looks really nice.
 
slaisebam30 said:
Here is the link

http://s64.photobucket.com/albums/h195/slaisebam/
Click to expand...


check this out....if you look at your pics in photobucket, there are 3 little boxes underneat with "addresses".

the bottom on says: "IMG". now copy what's in there into your post and it'll look like this

"IMG]http://i64.photobucket.com/albums/h195/slaisebam/DSCF0721.jpg[/IMG]" (i put the apostrophy there so it wouldn't show the pic.)

now if you just copy that link without putting the apostrophy like i did, then this happens when you hit submit.

DSCF0721.jpg
 
Hey Ryan, perhaps you should search around for Goatman's mid-arm 3-link.
I have seen the light and WILL be seriously considering doing that setup, but with Currie J-arms.
Longarms aren't the way of the righteous......
 
Okie Terry said:
Longarms aren't the way of the righteous......
Click to expand...
I like my arms. and do like the looks of goatmans setup, all around. but anything is better than stock arms with 5" of lift.
 
were the lug nuts not on sale? Looks way better than what I had pictured in my mind.
 
You must log in or register to reply here.

Similar threads

D
Locker / Posi combo for trail rig
Replies
13
Views
541
Evan03
E
J
Rumbling noise after putting on smaller tires
Replies
1
Views
137
Bent
Bent
C
NP231 On My Table
Replies
3
Views
130
phydeaux33
phydeaux33
B
Long Arm
Replies
2
Views
245
maxbraketorque
M
Bilskirnir3124
Looking for recommendations on replacement rear leaf springs
Replies
18
Views
664
Bilskirnir3124
Bilskirnir3124
Back
Top