297 Shafts, complete with hubs

[hjeepxj]

Came out of a 91+, w/abs, so they have the ABS tone ring, and I can get that pressed off if you'd like, no charge.

They take a x297 ujoint, so it is an upgrade to anyone with the 260 ujoint, and you can even install an x760 ujoint, making it very heavy duty, same ujoints a D44 uses...

They include the hub, on both sides, the hubs, shafts, and ujoints are all in good condition.

They are both NON-Disco.

150$+ 10$ shipping

 

[hjeepxj]

Bttt

 

[XJONABUDGET]

Man seems a little steep. I will give $75 shipped.

 

[BillR]

Man seems a little steep. I will give $75 shipped.

:huh: For BOTH shafts WIH HUBS??? nice try...
I just sold a set of used hubs alone for $65!
This is a nice deal!

 

[Weasel]

So what do I need to put these into a Disco axle? Seal wise I mean, I can hadle the cover plate.

 

[offroadman83]

This is a good deal. I bought some spare shafts and joints from Ary (Safari Ary on Naxja) more than a year ago, probably more than two and paid a little bit more I believe. So in other words a good deal--------Kyle

 

[jrsxj98]

Hey man don't sell those shafts out from under me :roll:

 

[hjeepxj]

They're sold!

(Don't worry Justin, I just forgot about this post and just saw it, theyre still yours... :cheers: )

So what do I need to put these into a Disco axle? Seal wise I mean, I can hadle the cover plate.

Well, since these shafts are gone, I'll still give you teh info on the swap...

All you have to do, is take all of the old stuff out, remove the carrier and put in a new seal beside the carrier, the seal # is 11771, and you don't have to worry about the shims with the carrier, they are inboard if the bearings. Then you put it all back together and fab a plate to go over the hole, or just plug the old vacuum housing...

Any more Q's feel free to PM...