- Location
- Winfield, MO
I have a set of rear unibody stiffeners from DB Metalworks that I'm not going to be using, decided to get a set of IRO since they plate the bottom of the unibody. The dbm's are 10ga flat stiffeners.
May also have with me a set of rubicon express 4.5 coils that are a few years old. Just had to go a bit higher with the 60 and 37s.
And depending on how much lift these alcan springs give me, may also have a set of rubicon express 3.5" leafs
I'd let the stuff go pretty cheap if there's any interest
Sent from my Pixel 3 XL using Tapatalk
May also have with me a set of rubicon express 4.5 coils that are a few years old. Just had to go a bit higher with the 60 and 37s.
And depending on how much lift these alcan springs give me, may also have a set of rubicon express 3.5" leafs
I'd let the stuff go pretty cheap if there's any interest
Sent from my Pixel 3 XL using Tapatalk