Who has a 8.25 interested in a 5.13 gear set install

[RWKHausSupply]

Looking for someone to test a set of rear C8.25 gears. This is the first 5.13 ratio I think ever offered.
This offer will be filled fast. Likely by end of day. ONLY TAKING EMAILS on "dibs".
You Must:
Provide a good condition jeep with few or no reliability issues.
Pay for labor - discounted rate - $250.
Follow all break in procedures (these are easy).
Change the diff oil at 250miles.

You get to keep the gears and will heavily discount the front 5.13 ratio set and labor if desired.

You will be the Only 8.25 with 5.13's yet. They are manufactured by the largest manufacture we know of for aftermarket jeep gears. Quality is top notch.

Must email for consideration
[email protected]

Robert

 

[stockerwithalocker]

How will that work for the front? I thought 4.88 was the lowest you could go in a d30?

 

[Chip Clip]

D44

 

[cal]

How will that work for the front? I thought 4.88 was the lowest you could go in a d30?

Revolution gear has been offering 5.13's for the hp30 for a while now.

 

[souske]

Revolution gear has been offering 5.13's for the hp30 for a while now.

Hows the pinion contact patch?

 

[David_Bricker]

Hows the pinion contact patch?

What contact patch?

David Bricker / SYR

 

[GSequoia]

Hows the pinion contact patch?

Two teeth works in Elsinore, it'll work in a 30.

 

[Russ Pottenger]

.... and on the opposite end of the scale you have David Bricker in the middle of a high pinion front 60 build to be matched up with his rear 60.

He Da Man

 

[Ronbo]

According to Four Wheeler, the 5.13 gear set for the Cherokee XJ Dana 30: "This was achieved by changing the tooth count on the ring gear so the size of the pinion head did not have to be sacrificed."

So basically, what Sequoia said.

 

[RWKHausSupply]

There is a tj on 35s, d30f and d35r with 513s in each. Has ran every trail within any reason in JV numerous times. Following and even at times showing up a buggy or two in thier group. Even has a doubled 231tc. Never broke any gear sets nor shafts.

So contact pattern is for what?
Its driving skill, and knowledgeable about what you have and how to work it...