Where to buy heim spacers for Bilstein?

[rockclimber]

I cut my own with some 1/2" ID tubing. It's close to 3/4" OD.

FYI most any coilover mfgs spacers would work, almost all of them use 1/2" bolts.

I cut them a bit wider than the ones bilstein sells to fit the mounts I made.

In that application they do not need to be chromoly.

 

[Xtreme XJ]

Will a 1/4" wide misalignment spacer work ?

Curt

 

[rockclimber]

Will a 1/4" wide misalignment spacer work ?

Curt

depends on the width of the mounts you are using..

mine are about 1" or 1.5" wide iirc.

 

[RWKHausSupply]

Like I said. Orchard. Or even ace hardware sells them..

They are just plain ole spacers. No mis-alignment.

 

[cracker]

I believe I have a bunch at home if you need some.

 

[GrimmJeeper]

i bought some at the hardware store with a smaller ID because it was all i could find and just drilled em out to 1/2" when i put my coilovers in

 

[djblade311]

I have some in south orange county if you need a few.

 

[tone]

I went to Ace, Lowes, Autozone, Home Depot, Orileys, and Pep Boys this afternoon needless to say none of them had it... Local is out of the question

 

[rockclimber]

do you not have a steel supply in your area?

have you tried calling fox or king or polyperformance?

 

[RWKHausSupply]

I went to Ace, Lowes, Autozone, Home Depot, Orileys, and Pep Boys this afternoon needless to say none of them had it... Local is out of the question

Wow. Even my dumb orchard here in yorba linda has em...

 

[supertubesocks]

Re: Re: Where to buy heim spacers for Bilstein?

I went to Ace, Lowes, Autozone, Home Depot, Orileys, and Pep Boys this afternoon needless to say none of them had it... Local is out of the question

Really? I'll sell you a set of 8 bilstein spacers $30 shipped to you.

 

[cracker]

I'll send you to 8 for free.....once I locate them

 

[Xtreme XJ]

You guys forget we're just to the left of Bum F*** Egypt out here...

Tone hit of Gold Coast or Santa Fe metal suppliers... buy a foot & cut it to fit... if you haven't found something online.

Curt

 

[jumpnjeep]

Step one: stop asking for HEIM spacers.
Step two: go to local (decent) hardware store.
Step three: ask for steel spacers or steel tubing.
Step four: problem solved.

 

[scottmcneal]

Tone i may have something here for you.I'll look this weekend and let you know.As you know i have all kinds of stuff here to help out people. So give time to see ok.

But if you find it before Saturday let me know, this will probably wear me out looking

 

[Beamer]

IMS...

 

[Jeepnut1]

I'll admit I didn't read the whole thread but did you try Tand J in Orange thats who I get my bilstein stuff through.

 

[Original_MudButt]

... Or give me the dimensions and I'll make you a set...

 

[tone]

Yes I tried T&J last week when I was there. Cracker has me taken care of, thanks for all the helpful replies.

 

[tone]

Thanks again cracker got them in the mail today!