Exxon Valdez Jeep
NAXJA Forum User
- Location
- Temple TX
Re: What was done to YOUR rig today?
Dump a bag of ice on the back floor... :laugh:
Dump a bag of ice on the back floor... :laugh:
What was done to YOUR rig(XJ/MJ) today MECHANICALY????
- Thread starter ExTankerGuy
- Start date
DeftwillP
NAXJA Forum User
- Location
- Round Rock TX
Re: What was done to YOUR rig today?
How bad are the damages?
How bad are the damages?
wheelinscott
NAXJA Forum User
- Location
- Ogden
Re: What was done to YOUR rig today?
need to replace the floor pan and the carpet back there. the seat got a little crispy on the edge of it, but you cant really see it.
need to replace the floor pan and the carpet back there. the seat got a little crispy on the edge of it, but you cant really see it.
spokes2002
NAXJA Forum User
- Location
- Coaldale, PA
Re: What was done to YOUR rig today?
i've been real frustrated lately with my jeep feeling shitty... Maybe it has a fever... today i replaced the throttle body with a Painless hi-velocity 62mm, all new sensors, MAP, TPS, IAC...
i've been real frustrated lately with my jeep feeling shitty... Maybe it has a fever... today i replaced the throttle body with a Painless hi-velocity 62mm, all new sensors, MAP, TPS, IAC...
Swamprat
NAXJA Forum User
- Location
- little Tijuana
Re: What was done to YOUR rig today?
sold it, well the subaru... so i guess im planning pure evilness for my jeep:firedevil
sold it, well the subaru... so i guess im planning pure evilness for my jeep:firedevil
Texas Twitch
NAXJA Forum User
- Location
- Plano, TX
Re: What was done to YOUR rig today?
changed my starter and battery in a convenience store parking lot (woohoo for free parts!) and that still wouldn't send a signal to the starter. checked the wire for my remote starter switch, and where it attaches to the fuse wire next to the positive terminal, it had become unsoldered. re soldered it, and it is GTG! with a free new battery and free new starter no less!
changed my starter and battery in a convenience store parking lot (woohoo for free parts!) and that still wouldn't send a signal to the starter. checked the wire for my remote starter switch, and where it attaches to the fuse wire next to the positive terminal, it had become unsoldered. re soldered it, and it is GTG! with a free new battery and free new starter no less!
Twisted_Dakota
NAXJA Forum User
- Location
- Ft. Worth, TX
Re: What was done to YOUR rig today?
Installed my H.I.D.'s in my IPF headlights. what a difference.
Installed my H.I.D.'s in my IPF headlights. what a difference.
DeftwillP
NAXJA Forum User
- Location
- Round Rock TX
Re: What was done to YOUR rig today?
Let's see some pics Evan. I wanna do that for sure. Did you upgrade your harness as well? Oh yeah, which HID kit did you go with?
Let's see some pics Evan. I wanna do that for sure. Did you upgrade your harness as well? Oh yeah, which HID kit did you go with?
Twisted_Dakota
NAXJA Forum User
- Location
- Ft. Worth, TX
Re: What was done to YOUR rig today?
Kit is: Xtune. Previous owner had already upgraded the harness. Ill get some pics in a bit.
Kit is: Xtune. Previous owner had already upgraded the harness. Ill get some pics in a bit.
offroadman83
NAXJA Forum User
- Location
- Edinburg Texas
Re: What was done to YOUR rig today?
Put it on the trailer to go wheel the weekend away!!!!
Put it on the trailer to go wheel the weekend away!!!!
Swamprat
NAXJA Forum User
- Location
- little Tijuana
Re: What was done to YOUR rig today?
i shipped my ZJ off to a shop to have the tranny fixed, and i learned never to have a tow truck do anything when its trafficy out, it cost me about $170 to have my jeep towed one way like 20 miles....
i shipped my ZJ off to a shop to have the tranny fixed, and i learned never to have a tow truck do anything when its trafficy out, it cost me about $170 to have my jeep towed one way like 20 miles....
Twisted_Dakota
NAXJA Forum User
- Location
- Ft. Worth, TX
Re: What was done to YOUR rig today?
Just bought and picked up a 79' F250 HP D44: 3" wide axle tubes that are 1/2" wall. Strength all for $200. No more axle hunting yay!!!!!
Just need to sell the rest of my d30 crap and the hybrid knuckles.
Just bought and picked up a 79' F250 HP D44: 3" wide axle tubes that are 1/2" wall. Strength all for $200. No more axle hunting yay!!!!!
Just need to sell the rest of my d30 crap and the hybrid knuckles.
XJ Eric
NAXJA Forum User
- Location
- Allegheny National Forest
Re: What was done to YOUR rig today?
Paid for a electric fan today. Yay! no more worrying about overheating this summer!
Paid for a electric fan today. Yay! no more worrying about overheating this summer!
- Location
- Richardson, TX
Re: What was done to YOUR rig today?
Put in some different front coils. Pics when its not raining and you can actually see.
Put in some different front coils. Pics when its not raining and you can actually see.
drifto77
NAXJA Forum User
- Location
- Sherman,TX.
Re: What was done to YOUR rig today?
Drove mine in the rain today to wash the mud off it.
Drove mine in the rain today to wash the mud off it.
- Location
- Richardson, TX
Re: What was done to YOUR rig today?
Put some 2.5" lift springs, another isolator, and front JK shocks in yesterday.
Just now cut the front air dam/valance and little bit of the flares.
Put some 2.5" lift springs, another isolator, and front JK shocks in yesterday.
Just now cut the front air dam/valance and little bit of the flares.
lil_red_wagon
NAXJA Forum User
- Location
- hot springs ar
Re: What was done to YOUR rig today?
i boke a yoke on my rear driveshaft so i had to fix that in the middle of the trail yesterday at superlift
i boke a yoke on my rear driveshaft so i had to fix that in the middle of the trail yesterday at superlift
Swamprat
NAXJA Forum User
- Location
- little Tijuana
Re: What was done to YOUR rig today?
i tried calling the shop that currently has my jeep, and found out there closed today
i tried calling the shop that currently has my jeep, and found out there closed today
Re: What was done to YOUR rig today?
Installed my new gas tank skid that I got from lil' red wagon. Very nicely built and can't wait to test it out now.
I had to trim 5 3/4" off my heat shield, may not have needed it anymore, but figured it couldn't hurt.
Drilled three holes across the front edge of the skid to allow water to drain.
Had to removed my trailer hitch, so that I could put the skid plate hangers underneath it.
Would have been easier with a helper, but it got done!!
Thanks Worp Speed (lil red wagon).
Installed my new gas tank skid that I got from lil' red wagon. Very nicely built and can't wait to test it out now.
I had to trim 5 3/4" off my heat shield, may not have needed it anymore, but figured it couldn't hurt.
Drilled three holes across the front edge of the skid to allow water to drain.
Had to removed my trailer hitch, so that I could put the skid plate hangers underneath it.
Would have been easier with a helper, but it got done!!
Thanks Worp Speed (lil red wagon).
Similar threads
