What did you do to your XJ today

[catchmytalon]

well im really excited i hope everyone else is also well i just picked up a 78 ford hp44 with an ox locker, 488s, and a tnt truss and a cherokee 44 rear with 488s and a detroit. well needless to say i switched the ox and detroit cause the front has hubs so whats the point of the fully selectable locker in the front. got them all installed (finished at 1 this morning) than took it out wheeling today and everything ran great and went wherever i pointed it it was sweet and i only paid 1700

 

[jonesinxj]

2400 later I have a new set of tires and rims and a front axle eith gears and locker

So when is the work party:dunno:

 

[Gold Cobra]

Found a pretty bad crack in my tracbar mount, messed with my brakes some more with almost no change, and it has developed quite an oil leak.

FML

 

[BenDiesel]

So when is the work party:dunno:

December 24 to january 3rd

 

[BenDiesel]

So when is the work party:dunno:

December 24 to january 3rd

 

[WaXJ_Skier]

This should be in the mail on Monday

 

[TORX]

Found a pretty bad crack in my tracbar mount, messed with my brakes some more with almost no change, and it has developed quite an oil leak.

FML

OEM or aftermarket track bar mount? I still have my stock one if you need it.

What's the issue with the brakes? Make sure the calipers are on the right way (bleeders on top).

How bad is bad? Carry spare oil, fix later.

As treasurer elect, you are required to make it to the Thanksgiving Run.

 

[TORX]

What did I do to my XJ today?

I pulled some Chevy's out, and pushed some snow.

 

[Steve98XJ]

Took apart my nss, cleaned, reinstalled. works great. actually starts all the time now.
Used the (How to clean your NSS) write-up on the Jeepin.com site.

 

[XJ_ranger]

took the muffler off (the driveshaft was rubbing on it) and replaced the ripped valve stem.

Tightened the rear driveshaft bolts that were not even finger tight.

Didnt check the front DS bolts.

Going wheeling tomorrow.

 

[northwestxj]

well im really excited i hope everyone else is also well i just picked up a 78 ford hp44 with an ox locker, 488s, and a tnt truss and a cherokee 44 rear with 488s and a detroit. well needless to say i switched the ox and detroit cause the front has hubs so whats the point of the fully selectable locker in the front. got them all installed (finished at 1 this morning) than took it out wheeling today and everything ran great and went wherever i pointed it it was sweet and i only paid 1700

Nice, sounds like a REALLY good deal, where did those come from?

 

[kndrewa]

One of the tubes on my exhaust manifold was cracked all the way around.
I put in an APN header today.

 

[NW-ZJ-SCOTT]

:scared: didnt we phone that fool home back in the 80's?

:spin1:

 

[muddypunk]

This my new front bumper intsalled on friday

 

[BenDiesel]

lol nice header i got the same one.

 

[jonesinxj]

:scared: didnt we phone that fool home back in the 80's?

:spin1:

hahaha.... i just got it:gee:

 

[AwesomeXJ]

Took the jeep down to the plant i work at and fabbed up some supports for my drop brackets. Then had my buddy Mo weld them up for me. They look pretty good and also feel like they tightened up my frame a little. They should also help with not getting hung up on rocks and stuff while in reverse.

 

[WaXJ_Skier]

ground enough material off of my passenger side shaft ears to be able to get the shaft out and the knuckle off.

 

[dellstopjeep]

This should be in the mail on Monday

Thats mighty pretty which pitman arm is that and who made made it double shear for ya? Think I might consider that idea if I were to break my wj arm.

 

[AwesomeXJ]

Thats mighty pretty which pitman arm is that and who made made it double shear for ya? Think I might consider that idea if I were to break my wj arm.

That doesn't create vibration issues on the highway?
I mean with the drag link being loose and all.
:dunno: